홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Oxygen → HCID 131726455, 화합물

HRID 1353017
인쇄

반응식

HRID 1353017 반응식
C[SiH](C)CCC(F)(C=C)C(F)F.[B:13]([CH2:22][CH2:23][CH2:24][CH3:25])([CH2:18][CH2:19][CH2:20][CH3:21])[CH2:14][CH2:15][CH2:16][CH3:17].[O:26]=[O:27]>C(Cl)Cl>[B:13]([CH2:18][CH2:19][CH2:20][CH3:21])([CH2:22][CH2:23][CH2:24][CH3:25])[CH2:14][CH2:15][CH2:16][CH3:17].[O:26]=[O:27]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 977OxygenHCID 31216TributylboraneHCID 123367077Dimethyl 3,4,4-trifluoro-3-vinyl-butylsilane

생성물 1

HCID 131726455HCID 131726455, 화합물수율 40%

시약·촉매·용매 1

HCID 6344Dichloromethane용매

실험 절차

The radical polymerization was conducted in a 70 ml stainless autoclave equipped with a magnetic stirrer. After adding 3.0 g of CF2═CFCH2CH2Si(CH3)2H, 0.1 g of (n-C4H9)3B, and 20 ml CH2Cl2 under argon, 20 ml of VDF and 5 ml of HFP were introduced into the reactor under vacuum by condensing the monomers at liquid nitrogen temperatures. About 15 ml of O2 was then introduced to initiate the polymerization. The autoclave was slowly warmed to room temperature and then immersed in an oil bath at 80° C. for 20 hours. After recovering the unreacted monomers, the slurry was dried under vacuum to obtain 4.5 g of a white polymer powder, with 40% yield.

후처리

  1. customThe radical polymerization
  2. customequipped with a magnetic stirrer
  3. addition20 ml of VDF and 5 ml of HFP were introduced into the reactor under vacuum by condensing the monomers at liquid nitrogen temperatures
  4. customthe polymerization
  5. customAfter recovering the unreacted monomers
  6. customthe slurry was dried under vacuum

출처 및 근거

ORD 기록
ord-2c9bba77389e46e7a894c0b777008389
출처 데이터셋
uspto-grants-2007_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07220807B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트