홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1-Octene → 1-Decene, adduct with 1-octene (1:1)

HRID 1358687
인쇄

반응식

HRID 1358687 반응식
C(OCCCC)CCC.[Al].[Cl-].C([Al+]CC(C)C)C(C)C.[CH2:21]=[CH:22][CH2:23][CH2:24][CH2:25][CH2:26][CH2:27][CH3:28].[CH2:29]=[CH:30][CH2:31][CH2:32][CH2:33][CH2:34][CH2:35][CH2:36][CH2:37][CH3:38]>CCCCCCC>[CH2:21]=[CH:22][CH2:23][CH2:24][CH2:25][CH2:26][CH2:27][CH3:28].[CH2:29]=[CH:30][CH2:31][CH2:32][CH2:33][CH2:34][CH2:35][CH2:36][CH2:37][CH3:38]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 5

HCID 81251-OcteneHCID 8909Butyl etherHCID 133811-DeceneHCID 5359268AluminumHCID 16686353Diisobutyl aluminium chloride2회

생성물 1

HCID 1622001-Decene, adduct with 1-octene (1:1)

시약·촉매·용매 1

HCID 8900
Heptane
용매

실험 절차

A catalyst is prepared by combining, in a primarily nitrogen environment under ambient temperature and pressure, 0.090 grams of TiCl3.AA with 1.0 milliliters of purified petroleum distillate, together with 83 microliters of dibutyl ether promoter according to the teachings of Mack U.S. Pat. No. 4,416,714. The solution is held for 30 minutes while stirring. The catalyst is then activated using 0.89 milliliters of an aluminum cocatalyst, a 25% solution of diisobutyl aluminum chloride (DIBAC) in heptane solvent (“25% DIBAC solution”). Again, the mixture is held for 30 minutes while stirring. An octene-decene copolymer is prepared in primarily nitrogen environment under standard temperature and pressure by mixing 572 ml of purified petroleum distillate, 42.9 milliliters of 1-octene, and 5.7 milliliters of 1-decene in a beaker. After stirring, 3.3 milliliters of a 25% DIBAC solution is added to the solvent and mixed olefins in the beaker. The mixture is held for 30 minutes with stirring. The entire 1.0 milliliter of catalyst mixture prepared is added to the beaker while the contents are being stirred. The entire mixture is allowed to react and as the solution becomes viscous, the agitation is discontinued. The copolymer is subsequently tested. Conversion to polymer is greater than 95% and the inherent viscosity is sufficient for good drag reduction.

후처리

  1. customA catalyst is prepared
  2. customby combining, in a primarily nitrogen environment under ambient temperature
  3. waitAgain, the mixture is held for 30 minutes
  4. stirringwhile stirring
  5. stirringAfter stirring
  6. waitThe mixture is held for 30 minutes
  7. stirringwith stirring
  8. additionis added to the beaker while the contents
  9. stirringare being stirred
  10. customto react and as the solution

출처 및 근거

ORD 기록
ord-c8684096a4fd4194a8b80f4c08b32dd0
출처 데이터셋
uspto-grants-2003_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06596832B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트