홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dichloromethane → Naphthalene-2-carboxylic acid[4-(2-hydroxycarbamoyl-vinyl)-phenyl]-amide

HRID 1362567
인쇄

반응식

HRID 1362567 반응식
[CH:1]1[C:10]2[C:5](=[CH:6][CH:7]=[CH:8][CH:9]=2)[CH:4]=[CH:3][C:2]=1[C:11]([NH:13][C:14]1[CH:19]=[CH:18][C:17]([CH:20]=[CH:21][C:22]([OH:24])=O)=[CH:16][CH:15]=1)=[O:12].C(Cl)Cl.Cl.[NH2:29][OH:30]>CN(C)C=O.O1CCCC1>[OH:30][NH:29][C:22]([CH:21]=[CH:20][C:17]1[CH:18]=[CH:19][C:14]([NH:13][C:11]([C:2]2[CH:3]=[CH:4][C:5]3[C:10](=[CH:9][CH:8]=[CH:7][CH:6]=3)[CH:1]=2)=[O:12])=[CH:15][CH:16]=1)=[O:24]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 6344DichloromethaneHCID 443297Hydroxyamine hydrochlorideHCID 669583943-{4-[(Naphthalene-2-carbonyl)-amino]-phenyl}-acrylic acid

생성물 1

HCID 86592260Naphthalene-2-carboxylic acid[4-(2-hydroxycarbamoyl-vinyl)-phenyl]-amide수율 45%

시약·촉매·용매 2

HCID 6228Dimethylformamide촉매
HCID 8028
Tetrahydrofuran
용매

반응 조건

온도
40 °C

실험 절차

(Method H8) To a suspension of 3-{4-[(naphthalene-2-carbonyl)-amino]-phenyl}-acrylic acid (5c) (0.740 g, 1.75 mmol) in methylene chloride (8 ml) oxalyl chloride (0.54 ml, 6.14 mmol) and one drop of dimethylformamide were added. The mixture was stirred for 30 min. at room temperature and for 1 hour at 40° C. Then the mixture was concentrated under reduced pressure and the residue was diluted with tetrahydrofuran (8.0 ml). In an another vessel, to a suspension of hydroxylamine hydrochloride (0.695 g, 10.0 mmol) in tetrahydrofuran (12 ml) saturated NaHCO3 solution (8.0 ml) was added and the mixture was stirred at room temperature for 5 min. The both mixtures were combined and vigorously stirred at room temperature for 30 min. The solvents were evaporated and the residue was acidified with 3% HCl to pH 5. The resulting precipitate was filtered off and washed with water (3×10 ml). The crystallization from methanol/water provided the title compound as a white solid (0.262 g, 45%). M.p. 231-233° C. 1H NMR (DMSO-d6, HMDSO) δ: 6.41 (d, 1H, J=15.8 Hz); 7.45 (d, 1H, J=15.8 Hz); 7.52-7.70 (m, 4H); 7.82-8.16 (m, 6H); 8.59 (s, 1H); 9.02 (s, 1H); 10.58 (s, 1H); 10.73 (s, 1H). HPLC analysis on Zorbax SB-C18 column: impurities <1% (column size 4.6×150 mm; mobile phase methanol-0.1% H3PO4, gradient from 50:50 to 90:10; sample concentration 0.05 mg/ml; flow rate 1.5 ml/min.; detector UV 220 nm). Anal. Calcd for C20H16N2O3 containing 1% of inorganic impurities, %: C, 71.55; H, 4.80; N, 8.34. Found, %: C, 71.60; H, 4.78; N, 8.39.

후처리

  1. additionwere added
  2. concentrationThen the mixture was concentrated under reduced pressure
  3. additionthe residue was diluted with tetrahydrofuran (8.0 ml)
  4. additionwas added
  5. stirringthe mixture was stirred at room temperature for 5 min
  6. stirringvigorously stirred at room temperature for 30 min
  7. customThe solvents were evaporated
  8. filtrationThe resulting precipitate was filtered off
  9. washwashed with water (3×10 ml)
  10. customThe crystallization from methanol/water

출처 및 근거

ORD 기록
ord-ec758d8c4790474e80b3803719067ba5
출처 데이터셋
uspto-grants-2011_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07880020B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트