1-Bromopropane → HCID 13671256, 화합물

HRID 1380441노트

반응식

HRID 1380441 반응식
[CH3:1][O:2][C:3]1[CH:4]=[C:5]([C:9]2[CH2:10][CH2:11][N:12]([CH3:15])[CH2:13][CH:14]=2)[CH:6]=[CH:7][CH:8]=1.[CH2:16]([Li])[CH2:17][CH2:18]C.C(Br)CC>C1COCC1.CCCCCC>[CH3:1][O:2][C:3]1[CH:4]=[C:5]([C:9]2([CH2:16][CH2:17][CH3:18])[CH:10]=[CH:11][N:12]([CH3:15])[CH2:13][CH2:14]2)[CH:6]=[CH:7][CH:8]=1

참가 물질

6

반응물 3

HCID 78401-BromopropaneHCID 1557781,2,3,6-Tetrahydro-4-(3-methoxyphenyl)-1-methylpyridineHCID 178418339Butyllithium

생성물 1

HCID 13671256HCID 13671256, 화합물수율 75%

시약·촉매·용매 2

HCID 8028Tetrahydrofuran용매2회HCID 8058Hexane용매

반응 조건

온도
-5 °C

실험 절차

A solution of 900 g (4.43 mol) of 1,2,3,6-tetrahydro-4-(3-methoxyphenyl)-1-methylpyridine dissolved in 10.8 liters of dry THF was added to a dry, nitrogen purged 22 liter reaction flask equipped with a stirrer, low temperature thermometer, and addition funnel. The temperature of the reaction mixture was lowered to approximately -10° C. whereupon 3.04 liters of 1.6 molar n-butyllithium in hexane was added at a rate so as to maintain the temperature below -5° C. The resulting deep red solution was stirred for 15 minutes at -5° C. and 572 g (4.65 mol) of n-propylbromide in 2.4 liters of dry tetrahydrofuran were added at such a rate so that the temperature remained below -5° C. The reaction mixture was stirred for 10 minutes at -5° C. and then carefully quenched by the addition of 1.5 liters of water to destroy any excess n-butyllithium. The organic phase was separated, washed with 1.5 liters of water, 1.5 liters of saturated sodium chloride solution and dried over 500 g of anhydrous sodium sulfate. Evaporation of the solvent gave 1126 g of crude 1,2,3,4-tetrahydro-4-(3-methoxyphenyl)-1-methyl-4-propylpyridine (75% pure).

후처리

  1. additionwas added to a dry, nitrogen
  2. custompurged
  3. custom22 liter reaction flask
  4. customequipped with a stirrer
  5. additionlow temperature thermometer, and addition funnel
  6. additionwas added at a rate so as
  7. temperatureto maintain the temperature below -5° C
  8. customremained below -5° C
  9. stirringThe reaction mixture was stirred for 10 minutes at -5° C.
  10. customcarefully quenched by the addition of 1.5 liters of water
  11. customto destroy any excess n-butyllithium
  12. customThe organic phase was separated
  13. washwashed with 1.5 liters of water, 1.5 liters of saturated sodium chloride solution
  14. dry with materialdried over 500 g of anhydrous sodium sulfate
  15. customEvaporation of the solvent

출처 및 근거

ORD 기록
ord-2040c6e999b44c56bddef18f84c29740
출처 데이터셋
uspto-grants-1986_04
특허 번호
US04581456

반응 노트

불러오는 중…