Methanol → (S)-2-(4-Fluorophenyl)-3-(2-methylpyrrolidin-1-yl)quinoxaline-6-carboxylic acid

HRID 1405590노트

반응식

HRID 1405590 반응식
[F:1][C:2]1[CH:7]=[CH:6][C:5]([C:8]2[C:17]([N:18]3[CH2:22][CH2:21][CH2:20][C@@H:19]3[CH3:23])=[N:16][C:15]3[C:10](=[CH:11][CH:12]=[C:13]([C:24]([O:26]CCCC)=[O:25])[CH:14]=3)[N:9]=2)=[CH:4][CH:3]=1.CO.[OH-].[Na+]>O>[F:1][C:2]1[CH:7]=[CH:6][C:5]([C:8]2[C:17]([N:18]3[CH2:22][CH2:21][CH2:20][C@@H:19]3[CH3:23])=[N:16][C:15]3[C:10](=[CH:11][CH:12]=[C:13]([C:24]([OH:26])=[O:25])[CH:14]=3)[N:9]=2)=[CH:4][CH:3]=1

참가 물질

5

반응물 3

HCID 887MethanolHCID 14798Sodium HydroxideHCID 68063092(S)-butyl 2-(4-fluorophenyl)-3-(2-methylpyrrolidin-1-yl)quinoxaline-6-carboxylate

생성물 1

HCID 50991311(S)-2-(4-Fluorophenyl)-3-(2-methylpyrrolidin-1-yl)quinoxaline-6-carboxylic acid

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
50 °C

실험 절차

Into a 10-mL sealed tube, was placed (S)-butyl 2-(4-fluorophenyl)-3-(2-methylpyrrolidin-1-yl)quinoxaline-6-carboxylate (150 mg, 0.37 mmol, 1.00 equiv), methanol (15 mL), sodium hydroxide (74 mg, 1.85 mmol, 5.02 equiv), water (2 mL). The resulting solution was stirred for 2 hrs at 50° C. in an oil bath. The resulting mixture was concentrated under vacuum and diluted with 20 mL of H2O. The pH value of the aqueous solution was adjusted to 4-5 with aq. hydrogen chloride (1 mol/L). The resulting solids were collected by filtration. The crude product (150 mg) was purified by Prep-HPLC with the following conditions (1#-Waters 2767-1): Column, SunFire Prep C18, 19*150 mm 5 um; mobile phase, water with 0.05% TFA and CH3CN (60% CH3CN up to 75% in 8 min, up to 100% in 1.5 min); Detector, UV 220 254 nm. This resulted in 60 mg (46%) of (S)-2-(4-fluorophenyl)-3-(2-methylpyrrolidin-1-yl)quinoxaline-6-carboxylic acid as a yellow solid.

후처리

  1. customInto a 10-mL sealed tube
  2. concentrationThe resulting mixture was concentrated under vacuum
  3. additiondiluted with 20 mL of H2O
  4. filtrationThe resulting solids were collected by filtration
  5. customThe crude product (150 mg) was purified by Prep-HPLC with the following conditions (1#-Waters 2767-1)
  6. waitmobile phase, water with 0.05% TFA and CH3CN (60% CH3CN up to 75% in 8 min
  7. waitup to 100% in 1.5 min)
  8. customThis resulted in 60 mg (46%) of (S)-2-(4-fluorophenyl)-3-(2-methylpyrrolidin-1-yl)quinoxaline-6-carboxylic acid as a yellow solid

출처 및 근거

ORD 기록
ord-e573829386c14e0c8217b2825ef4b4be
출처 데이터셋
uspto-grants-2014_12
특허 번호
US08916560B2

반응 노트

불러오는 중…