홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

5-Thiazolecarboxylic acid, 4-methyl-, ethyl ester → 5-Thiazolecarboxylic acid, 2-(3-cyano-4-(2-methylpropoxy)phenyl)-4-methyl-, ethyl ester

HRID 1406818
인쇄

반응식

HRID 1406818 반응식
[CH3:1][C:2]1[N:3]=[CH:4][S:5][C:6]=1[C:7]([O:9][CH2:10][CH3:11])=[O:8].Br[C:13]1[CH:14]=[CH:15][C:16]([O:21][CH2:22][CH:23]([CH3:25])[CH3:24])=[C:17]([CH:20]=1)[C:18]#[N:19]>C1(C)C(C)=CC=CC=1.CS(C)=O.[Pd]>[C:18]([C:17]1[CH:20]=[C:13]([C:4]2[S:5][C:6]([C:7]([O:9][CH2:10][CH3:11])=[O:8])=[C:2]([CH3:1])[N:3]=2)[CH:14]=[CH:15][C:16]=1[O:21][CH2:22][CH:23]([CH3:25])[CH3:24])#[N:19]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 2

HCID 2986105-Thiazolecarboxylic acid, 4-methyl-, ethyl esterHCID 665851345-Bromo-2-isobutoxybenzonitrile

생성물 1

HCID 98845495-Thiazolecarboxylic acid, 2-(3-cyano-4-(2-methylpropoxy)phenyl)-4-methyl-, ethyl ester

시약·촉매·용매 3

HCID 23938Palladium촉매HCID 679Dimethyl Sulfoxide용매
HCID 7237
O-Xylene
용매

반응 조건

온도
140 °C

실험 절차

To a test tube-type reaction vessel (60 mL) were added ethyl 4-methylthiazole-5-carboxylate (2.14 g, 12.5 mmol), 5-bromo-2-isobutoxybenzonitrile (2.54 g, 10.0 mmol) obtained in the Reference Example 1, and a solvent (7.6 mL), a palladium compound (0.025 mmol), a ligand (0.10 mmol), a base (21.0 mmol), carboxylic acid (0.10 mmol), an additive (0.10 mmol), and a reducing agent (0.10 mmol) listed in the Table 10. Thereafter, the reaction vessel was filled with nitrogen gas and sealed air-tight and the mixed solution was heated to 140° C. and stirred for 24 hours. After the completion of the reaction, a portion of the reaction solution was diluted with xylene and DMSO and the resulting solution was analyzed by HPLC measurement. The total HPLC area % of the compound A to D and TM was adjusted to 100%, the calculated yield of the subject material was computed from each HPLC area %. Calculation of the calculated yield from the HPLC area % of subject material was carried out by applying corresponding numbers in the following calculation formula. Yield (%) of TM=total amount of TM (mol)/[{total amount of A (mol)+total amount of C (mol)×2+total amount of TM (mol)}]×100 Total amount of each compound (mol)=HPLC area value (mAU) of each compound/HPLC area value (mAU/mol) per mol of each compound

후처리

  1. customobtained in the Reference Example 1
  2. additionThereafter, the reaction vessel was filled with nitrogen gas
  3. customsealed air-tight
  4. customAfter the completion of the reaction
  5. customCalculation of the calculated yield from the HPLC area % of subject material
  6. customYield (%) of TM=total amount of TM (mol)/[{total amount of A (mol)+total amount of C (mol)×2+total amount of TM (mol)

출처 및 근거

ORD 기록
ord-96966358f60145b79531e7378f2065b7
출처 데이터셋
uspto-grants-2014_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08916714B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트