홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sulfur Dioxide → 4-Chloro-3-methylbenzene-1-sulfonyl chloride

HRID 1438463
인쇄

반응식

HRID 1438463 반응식
[ClH:1].[Cl:2][C:3]1[CH:9]=[CH:8][C:6](N)=[CH:5][C:4]=1[CH3:10].N([O-])=O.[Na+].[S:15](=[O:17])=[O:16]>Cl.C(O)(=O)C>[Cl:2][C:3]1[CH:9]=[CH:8][C:6]([S:15]([Cl:1])(=[O:17])=[O:16])=[CH:5][C:4]=1[CH3:10]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 1119Sulfur Dioxide3회HCID 181991Benzenamine, 4-chloro-3-methyl-, hydrochloride (1:1)HCID 23668193Sodium Nitrite

생성물 1

HCID 2210014-Chloro-3-methylbenzene-1-sulfonyl chloride

시약·촉매·용매 2

HCID 176Acetic Acid용매3회HCID 313
Hydrochloric Acid
용매

반응 조건

온도
-5 °C

실험 절차

4-Chloro-3-methylaniline hydrochloride (75 g, 0.54 mol) was dissolved in 200 mL concentrated hydrochloride acid (200 mL) and acetic acid (60 mL). The mixture was cooled to −5° C. and NaNO2 (40.9 g, 0.59 mmol) was added. The mixture was stirred between −10° C. to −5° C. for 1 h. While the diazotization was in progress, glacial AcOH (600 mL) was placed in a 4000-mL beaker and stirred magnetically. Sulfur dioxide was introduced by a bubbler tube with a fritted end immersed below the surface of the AcOH until saturation was evident. Cuprous chloride (15 g) was added to the solution. The introduction of sulfur dioxide was continued until the yellow-green suspension becomes blue-green. The mixture was then placed in an ice bath and cooled to 10° C. The diazotization reaction mixture was subsequently added in portions over a 30 min period to the sulfur dioxide solution, ensuring the temperature of the solution did not exceed 30° C. After all the diazonium salt mixture was added, the mixture was poured into ice water (2 L). The resulting precipitate was filtered and re-dissolved in hexane (500 mL). The mixture was filtered through a pad of silica gel (100 g) and the filter pad was washed with hexane (300 mL). The combined filtrate was concentrated to yield 50 g of 4-chloro-3-methylbenzenesulfonyl chloride as slightly yellow solid.

후처리

  1. stirringstirred magnetically
  2. customThe mixture was then placed in an ice bath
  3. temperaturecooled to 10° C
  4. customThe diazotization reaction mixture
  5. customdid not exceed 30° C
  6. filtrationThe resulting precipitate was filtered
  7. dissolutionre-dissolved in hexane (500 mL)
  8. filtrationThe mixture was filtered through a pad of silica gel (100 g)
  9. washthe filter pad was washed with hexane (300 mL)
  10. concentrationThe combined filtrate was concentrated

출처 및 근거

ORD 기록
ord-0ef299bea34745e793399a4f7a7a6e71
출처 데이터셋
uspto-grants-2009_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07622583B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트