홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Hydroxide → m-tert-Butylbenzoic acid

HRID 1455341
인쇄

반응식

HRID 1455341 반응식
Br[C:2]1[CH:3]=[C:4]([CH:9]=[C:10]([C:12]([CH3:15])([CH3:14])[CH3:13])[CH:11]=1)[C:5]([O:7]C)=[O:6].[OH-].[Na+].BrBr>[OH-].[OH-].[Pd+2].CO.[Pd]>[C:12]([C:10]1[CH:9]=[C:4]([CH:3]=[CH:2][CH:11]=1)[C:5]([OH:7])=[O:6])([CH3:15])([CH3:13])[CH3:14]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 3

HCID 14798Sodium Hydroxide2회HCID 24408BromineHCID 21075153Methyl 3-bromo-5-tert-butylbenzoate

생성물 1

HCID 139037m-tert-Butylbenzoic acid수율 81.8%

시약·촉매·용매 3

HCID 23938Palladium촉매HCID 9942167Palladium hydroxide
촉매
2회
HCID 887Methanol용매

실험 절차

Preparation C2, Step 1: A mixture of the commercially available methyl 3-bromo-5-tert-butylbenzoate (700 mg, 2.58 mMol), aqueous NaOH (1 N, 7.75 mL, 7.75 mMol), and Pearlman's catalyst (100 mg) in methanol (20 mL) was hydrogenated at 50 psi for 22 hours. The catalyst was removed by filtration and rinsed with a small amount of methanol. The filtrate was concentrated in-vacuo to remove methanol, and the aqueous mixture was acidified with 1 N HCl (10 mL), then extracted with ethyl acetate (3×20 mL). The combined organic phases were dried over sodium sulfate, then concentrated in-vacuo. Analysis of the resulting material by LC/MS showed that the ester had hydrolyzed to the carboxylic acid, but that the bromide was still present. The material was dissolved in methanol (20 mL), and hydrogenated overnight at 50 psi in the presence of 1 N aqueous NaOH (5.2 mL, 5.2 mMol) and 10% palladium on activated carbon (50 mg). Analysis of the crude reaction mixture by LC/MS showed that the bromine was still present, so Pearlman's catalyst (200 mg) was added, and hydrogenation at 50 psi was continued for 23 hours. MS showed that the reaction was now complete, so the reaction was worked up as described previously in this example to yield 376 mg (81% yield) of white powder as product. MS (AP−)=177 (M−H)

후처리

  1. customThe catalyst was removed by filtration
  2. washrinsed with a small amount of methanol
  3. concentrationThe filtrate was concentrated in-vacuo
  4. customto remove methanol
  5. extractionextracted with ethyl acetate (3×20 mL)
  6. dry with materialThe combined organic phases were dried over sodium sulfate
  7. concentrationconcentrated in-vacuo
  8. dissolutionThe material was dissolved in methanol (20 mL)
  9. customhydrogenated overnight
  10. customAnalysis of the crude reaction mixture by LC/MS
  11. waithydrogenation at 50 psi was continued for 23 hours

출처 및 근거

ORD 기록
ord-58ca286659794b549a18e6c8dbc32e69
출처 데이터셋
uspto-grants-2009_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07482335B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트