홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Oxalic Acid → Alpha,alpha'-bis(2,4-dihydroxyphenyl)-1,3-diisopropylbenzene

HRID 1463435
인쇄

반응식

HRID 1463435 반응식
[C:1]1([CH:8]=[CH:7][CH:6]=[C:4]([OH:5])[CH:3]=1)[OH:2].[C:9]([OH:14])(=O)[C:10](O)=O.[C:15]([C:18]1[CH:23]=[CH:22][CH:21]=[C:20]([C:24]([CH3:26])=[CH2:25])[CH:19]=1)([CH3:17])=[CH2:16]>CCCCCCC>[OH:2][C:1]1[CH:3]=[C:4]([OH:5])[CH:6]=[CH:7][C:8]=1[C:24]([C:20]1[CH:21]=[CH:22][CH:23]=[C:18]([C:15]([C:3]2[CH:4]=[CH:10][C:9]([OH:14])=[CH:8][C:1]=2[OH:2])([CH3:17])[CH3:16])[CH:19]=1)([CH3:26])[CH3:25]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 971Oxalic AcidHCID 5054ResorcinolHCID 773531,3-Diisopropenylbenzene

생성물 1

HCID 10861765Alpha,alpha'-bis(2,4-dihydroxyphenyl)-1,3-diisopropylbenzene

시약·촉매·용매 1

HCID 8900Heptane용매

반응 조건

온도
75 °C

실험 절차

Into a 2-liter kettle equipped with stirrer, thermometer, reflux condenser and an addition funnel, 264.0 grams of resorcinol (2.4 moles) 12.0 grams of oxalic acid and 900 ml of heptane were placed. The contents of this flask were heated to about 75° C. While maintaining the temperature of the resorcinolic slurry between about 75°-85° C., 126.4 grams of 1,3-diisopropenyl benzene (0.8 moles) was added dropwise for about 2 hours. After the completion of the above addition, the temperature of the reaction mixture was raised to and maintained at about 95° C. for about an additional 2.0 hours, while the reaction mixture was continuously stirred. The reaction mixture was then cooled and the separated heptane layer was removed by decantation. Finally the solidified mass was treated with excess dichloromethane to separate the reaction product. The white precipitate that separated from the solution was filtered, washed with dichloromethane and then washed with distilled water. After air drying at about room temperature the precipitate weighed 215 grams. Structural characterization by IR/NMR analysis of the reaction product confirmed the structure of 1,3-bis[(2,4-di-hydroxyphenyl)-alpha-methyl ethyl] benzene.

후처리

  1. customInto a 2-liter kettle equipped with stirrer
  2. temperaturethermometer, reflux condenser and an addition funnel
  3. temperatureWhile maintaining the temperature of the resorcinolic slurry between about 75°-85° C.
  4. additionAfter the completion of the above addition
  5. temperaturethe temperature of the reaction mixture was raised to and
  6. temperaturemaintained at about 95° C. for about an additional 2.0 hours, while the reaction mixture
  7. temperatureThe reaction mixture was then cooled
  8. customthe separated heptane layer was removed by decantation
  9. additionFinally the solidified mass was treated with excess dichloromethane
  10. customto separate the reaction product
  11. customThe white precipitate that separated from the solution
  12. filtrationwas filtered
  13. washwashed with dichloromethane
  14. washwashed with distilled water
  15. customAfter air drying at about room temperature the precipitate

출처 및 근거

ORD 기록
ord-39c4f8351a254d4c85f4414220c3368c
출처 데이터셋
uspto-grants-1994_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05300618

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트