홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → Ceftolozane Impurity 15

HRID 1470206
인쇄

반응식

HRID 1470206 반응식
[NH2:1][C:2]1[S:6][N:5]=[C:4](/[C:7](=[N:11]/[O:12][C:13]([CH3:22])([CH3:21])[C:14]([O:16][C:17]([CH3:20])([CH3:19])[CH3:18])=[O:15])/[C:8]([OH:10])=[O:9])[N:3]=1.C(=O)([O-])[O-].[K+].[K+].[CH3:29][S:30](Cl)(=[O:32])=[O:31].Cl>C(OCC)(=O)C.CN(C)C(=O)C>[CH3:29][S:30]([O:9][C:8](=[O:10])/[C:7](/[C:4]1[N:3]=[C:2]([NH2:1])[S:6][N:5]=1)=[N:11]\[O:12][C:13]([CH3:22])([CH3:21])[C:14]([O:16][C:17]([CH3:20])([CH3:19])[CH3:18])=[O:15])(=[O:32])=[O:31]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 313Hydrochloric AcidHCID 11430Potassium CarbonateHCID 31297Methanesulfonyl chlorideHCID 13577059(2Z)-2-(5-amino-1,2,4-thiadiazol-3-yl)-2-(2-methyl-1-((2-methylpropan-2-yl)oxy)-1-oxopropan-2-yl)oxyiminoacetic acid

생성물 1

HCID 85472100Ceftolozane Impurity 15수율 96.7%

시약·촉매·용매 2

HCID 8857
Ethyl Acetate
용매
2회
HCID 31374Dimethylacetamide용매

반응 조건

온도
3.5 °C

실험 절차

A 5.0 liter reactor was charged with N,N-dimethylacetamide (1.4 L). Solid (Z)-2-(5-amino-1,2,4-thiadiazol-3-yl)-2-(((1-(tert-butoxy)-2-methyl-1-oxopropan-2-yl)oxy)imino)acetic acid (250 g, 1 eq., prepared according to the method disclosed in U.S. Pat. No. 7,129,232) was added to the reactor at ambient temperature and the mixture was stirred until the solid was dissolved. The solution was cooled to about 4° C. (target: 2-5° C.) and stirred for another 10-15 minutes. Potassium carbonate (106.7 g, 184.9 mmol, 1.1 eq.) was added to the reactor in one portion. Methanesulfonyl chloride (118.0 mL, 2.2 eq.) was added to the reactor at a rate of about 5 mL/min while maintaining the batch temperature <10° C. The reaction was stirred for 1-2 hours at about 6° C., then cooled to about 0-5° C. Ethyl acetate (2.5 L, 10 volumes) was added to the reactor while maintaining a temperature of about 0-5° C. 1.6% HCl (aq) (1.35 L) was added to the reactor, maintaining a temperature of about 10-15° C. The biphasic mixture was agitated and the layers were then separated. The organic layer was washed with sodium chloride solution, dried with sodium sulfate and concentrated under reduced pressure to obtain crude material. The crude material was dissolved in ethyl acetate (150 mL) and filtered over silica gel. The filtrate was concentrated under reduced pressure to yield the title compound (299 g, 96.7%) as a colorless solid. Exact Mass: 408.08. HRMS: 409.0846 (M+1).

후처리

  1. addition7,129,232) was added to the reactor at ambient temperature
  2. dissolutionwas dissolved
  3. stirringstirred for another 10-15 minutes
  4. temperaturewhile maintaining the batch temperature <10° C
  5. stirringThe reaction was stirred for 1-2 hours at about 6° C.
  6. temperaturecooled to about 0-5° C
  7. temperaturewhile maintaining a temperature of about 0-5° C
  8. temperaturemaintaining a temperature of about 10-15° C
  9. stirringThe biphasic mixture was agitated
  10. customthe layers were then separated
  11. washThe organic layer was washed with sodium chloride solution
  12. dry with materialdried with sodium sulfate
  13. concentrationconcentrated under reduced pressure
  14. customto obtain crude material
  15. filtrationfiltered over silica gel
  16. concentrationThe filtrate was concentrated under reduced pressure

출처 및 근거

ORD 기록
ord-6c59921d4f184e54aba171e61f703244
출처 데이터셋
uspto-grants-2015_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09006421B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트