홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Sodium hydride → HCID 90087791, 화합물

HRID 1486438
노트
인쇄 미리보기

반응식

HRID 1486438 반응식
COP([CH2:7][C:8]([O:10][C:11]([CH3:14])([CH3:13])[CH3:12])=[O:9])(OC)=O.[H-].[Na+].[F:17][C:18]([F:24])([F:23])[CH:19]([CH3:22])[CH:20]=O>C1COCC1>[F:17][C:18]([F:24])([F:23])[CH:19]([CH3:22])/[CH:20]=[CH:7]/[C:8]([O:10][C:11]([CH3:14])([CH3:13])[CH3:12])=[O:9]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 24758Sodium hydrideHCID 27821883,3,3-trifluoro-2-methylpropanalHCID 4564495tert-Butyl Dimethylphosphonoacetate

생성물 1

HCID 90087791HCID 90087791, 화합물수율 40.6%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매3회

반응 조건

온도
0 °C

실험 절차

A solution of tert-butyl 2-(dimethoxyphosphoryl)acetate (9.78 g, 43.6 mmol) in THF (10 mL) was slowly transferred to a suspension of NaH (60% dispersion in mineral oil) (1.903 g, 47.6 mmol) in THF (30 mL) at 0° C. under a nitrogen atmosphere. After the addition was complete, the reaction mixture was stirred at 0° C. for 10 min, and then warmed to room temperature. After being stirred for 30 min, the reaction mixture was cooled to 0° C. again, and a solution of 3,3,3-trifluoro-2-methylpropanal (5 g, 39.7 mmol) in THF (10 mL) was added, and the ice bath was removed. After 12 h at 25° C., the mixture was partitioned between water (60 mL) and EtOAc (60 mL). The aqueous layer was extracted with EtOAc (60 mL), and the combined organic layers were successively washed with water (60 mL) and brine. The resulting solution was dried over MgSO4, concentration under reduced pressure, and purified by silica gel flash chromatography (330 g column, 0% to 15% EtOAc in hexane over 20 min) to obtain Intermediate S-5A (3.61 g, 16.10 mmol, 40.6% yield). 1H NMR (400 MHz, chloroform-d) δ 6.77 (dd, J=15.8, 7.7 Hz, 1H), 5.95 (dd, J=15.7, 0.6 Hz, 1H), 3.12-2.93 (m, 1H), 1.56-1.47 (m, 9H), 1.37-1.27 (m, 3H).

후처리

  1. additionAfter the addition
  2. temperaturewarmed to room temperature
  3. stirringAfter being stirred for 30 min
  4. temperaturethe reaction mixture was cooled to 0° C. again
  5. customthe ice bath was removed
  6. waitAfter 12 h at 25° C.
  7. customthe mixture was partitioned between water (60 mL) and EtOAc (60 mL)
  8. extractionThe aqueous layer was extracted with EtOAc (60 mL)
  9. washthe combined organic layers were successively washed with water (60 mL) and brine
  10. dry with materialThe resulting solution was dried over MgSO4, concentration under reduced pressure
  11. custompurified by silica gel flash chromatography (330 g column, 0% to 15% EtOAc in hexane over 20 min)
  12. customto obtain Intermediate S-5A (3.61 g, 16.10 mmol, 40.6% yield)

출처 및 근거

ORD 기록
ord-8f37d829e76a42a58dce25741aabce62
출처 데이터셋
uspto-grants-2016_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09427442B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트