홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.2
  1. 홈
  2. /반응

Water → 1-(5-Bromo-2-hydroxyphenyl)propan-1-one

HRID 1489191
인쇄

반응식

HRID 1489191 반응식
[Cl-].[Al+3].[Cl-].[Cl-].[C:5](Cl)(=[O:8])[CH2:6][CH3:7].[Br:10][C:11]1[CH:16]=[CH:15][C:14]([O:17]C)=[CH:13][CH:12]=1.O>ClCCl>[Br:10][C:11]1[CH:12]=[CH:13][C:14]([OH:17])=[C:15]([C:5](=[O:8])[CH2:6][CH3:7])[CH:16]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 962WaterHCID 77304-BromoanisoleHCID 62324Propionyl chlorideHCID 6451240Aluminum(III) Chloride

생성물 1

HCID 7364091-(5-Bromo-2-hydroxyphenyl)propan-1-one수율 91.1%

시약·촉매·용매 1

HCID 6344Dichloromethane용매2회

실험 절차

Aluminium chloride (3.747 kg) was added to dichloromethane (7.0 l) at room temperature and propionyl chloride (1.297 kg) was then added over a 10 minute period. The mixture was stirred for 45 minutes and then a solution of 4-bromoanisole (1.312 kg) in dichloromethane (0.87 l) was added over a 15 minute period. The mixture was heated under reflux for 6.5 hours and then kept overnight at room temperature. The ice-cooled reaction mixture was quenched by the slow addition of ice (15 kg) over 1.5 hours. The mixture obtained was stirred for 15 minutes, the layers were separated and the aqueous layer extracted with dichloromethane (2×1.0 l). The organic layers were combined and washed with water (2×2.0 l), then two-thirds of the solvent removed by distillation at atmospheric pressure. Methanol (5.63 l) was then added slowly and the distillation continued until a pot temperature of 64° C. and a head temperature of 62° C. was achieved. Water (0.4 l) was added slowly and the mixture was cooled resulting in the precipitation of an off-white solid. Further water (0.4 l) was then added slowly and the precipitated solid granulated at about 10° C. for 2 hours. The solid was then filtered off, washed sparingly with a 6:1 methanol/water mixture and dried under reduced pressure at 50° C. to provide the title compound (1.464 kg).

후처리

  1. temperatureThe mixture was heated
  2. temperatureunder reflux for 6.5 hours
  3. waitkept overnight at room temperature
  4. customreaction mixture
  5. customwas quenched by the slow addition of ice (15 kg) over 1.5 hours
  6. customThe mixture obtained
  7. stirringwas stirred for 15 minutes
  8. customthe layers were separated
  9. extractionthe aqueous layer extracted with dichloromethane (2×1.0 l)
  10. washwashed with water (2×2.0 l)
  11. customtwo-thirds of the solvent removed by distillation at atmospheric pressure
  12. additionMethanol (5.63 l) was then added slowly
  13. distillationthe distillation
  14. customcontinued until a pot temperature of 64° C.
  15. customa head temperature of 62° C.
  16. additionWater (0.4 l) was added slowly
  17. temperaturethe mixture was cooled
  18. customresulting in the precipitation of an off-white solid
  19. waitthe precipitated solid granulated at about 10° C. for 2 hours
  20. filtrationThe solid was then filtered off
  21. washwashed sparingly with a 6:1 methanol/water mixture
  22. customdried under reduced pressure at 50° C.

출처 및 근거

ORD 기록
ord-e6cf1291ca974f27b509c7051744174e
출처 데이터셋
uspto-grants-1997_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05677324

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트