홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethyl chloroacetate → Ethyl (dimethoxyphosphinoyl)acetate

HRID 1493822
인쇄

반응식

HRID 1493822 반응식
Cl[CH2:2][C:3]([O:5][CH2:6][CH3:7])=[O:4].[P:8]([O:13]C)([O:11][CH3:12])[O:9][CH3:10]>>[CH2:6]([O:5][C:3](=[O:4])[CH2:2][P:8]([O:11][CH3:12])([O:9][CH3:10])=[O:13])[CH3:7]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 2

HCID 7751Ethyl chloroacetateHCID 8472Trimethyl phosphite

생성물 1

HCID 67555Ethyl (dimethoxyphosphinoyl)acetate

반응 조건

온도
130 °C

실험 절차

An amount of 340.8 g of ethyl chloroacetate was mixed with 496 g of trimethyl phosphite in a reactor fitted with a thermometer, nitrogen inlet and a fractionation column (containing 5 mm Raschig rings as packing) topped with a variable reflux condenser. The reactor was heated to enable slow reflux in the column only followed by a slow increase in the temperature from 110 to 150 degrees C. over 10 hours and maintained at about this temperature. The pressure was reduced to 11 mm Hg and volatile material was removed on heating the reactor slowly from 50 to 140 degrees C. The yield of the pure product obtained was 85%.

후처리

  1. customfitted with a thermometer, nitrogen inlet
  2. additiona fractionation column (containing 5 mm Raschig rings as packing)
  3. customtopped with a variable reflux condenser
  4. temperatureThe reactor was heated
  5. temperatureto enable slow reflux in the column
  6. temperaturemaintained at about this temperature
  7. customwas removed
  8. temperatureon heating the reactor slowly from 50 to 140 degrees C
  9. customThe yield of the pure product obtained

출처 및 근거

ORD 기록
ord-d2b9fc54ff44472182a0eb9a5c9e0c90
출처 데이터셋
uspto-grants-1991_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05025002

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트