홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methyl Methacrylate → Di(butylamino)ethyl methacrylate

HRID 1514837
인쇄

반응식

HRID 1514837 반응식
[C:1]([O:6][CH3:7])(=[O:5])[C:2]([CH3:4])=[CH2:3].C([N:12]([CH2:16][CH2:17][CH2:18][CH3:19])[CH2:13]CO)CCC.CC(C)[O-].[Al+3].CC(C)[O-].CC(C)[O-].[C:33]1([NH:39]C2C3C(=CC=CC=3)C=CC=2)C=C[CH:36]=[CH:35][CH:34]=1>>[C:1]([O:6][CH2:7][CH:13]([NH:12][CH2:16][CH2:17][CH2:18][CH3:19])[NH:39][CH2:33][CH2:34][CH2:35][CH3:36])(=[O:5])[C:2]([CH3:4])=[CH2:3]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 4

HCID 6658Methyl MethacrylateHCID 7013Phenyl-1-naphthylamineHCID 76212-(Dibutylamino)ethanolHCID 11143Aluminum isopropoxide

생성물 1

HCID 86658023Di(butylamino)ethyl methacrylate

반응 조건

온도
80 °C

실험 절차

A 500 mL round bottomed flask fitted with a magnetic stirrer, heating mantle, and distillation head was charged with a mixture of methyl methacrylate (100 g, 1.0 mol, available from TCI), 2-dibutylaminoethanol (43.3 g, 0.25 mol, available from Matheson, Coleman and Bell, Norwood, Ohio), aluminum isopropoxide (5.0 g, 24 mmol, available form Alfa Aesar), and N-phenyl-1-naphthylamine (2.5 g, 11 mmol, available from Aldrich). The mixture was stirred and heated at 80° C. for one hour. The temperature of the reaction mixture was increased 10° C. per hour until a temperature of 110° C. was reached. By this time about 20 mL of material (methanol and methyl methacrylate) had distilled over from the reaction flask. The reaction mixture was left at room temperature overnight. The next day, the reaction mixture was heated at 115° C. for 2 hours and then heated at 135° C. as material distilled from the reaction flask. After 1 hour at 135° C., the desired product, di(butylamino)ethyl methacrylate, was distilled from the reaction flask at reduced pressure and collected at a temperature of 113-118° C. at 2.5 mm pressure. NMR spectral analyses confirmed the structure of the product. The boiling point reported previously for this methacrylate (U.S. Pat. No. 2,138,763 (DuPont)) is 108-109° C. at 2 mm pressure.

후처리

  1. customA 500 mL round bottomed flask fitted with a magnetic stirrer
  2. temperatureheating mantle
  3. distillationdistillation head
  4. temperatureThe temperature of the reaction mixture was increased 10° C. per hour until a temperature of 110° C.
  5. distillationBy this time about 20 mL of material (methanol and methyl methacrylate) had distilled over from the reaction flask
  6. temperatureThe next day, the reaction mixture was heated at 115° C. for 2 hours
  7. temperatureheated at 135° C. as material
  8. distillationdistilled from the reaction flask
  9. waitAfter 1 hour at 135° C.
  10. distillationthe desired product, di(butylamino)ethyl methacrylate, was distilled from the reaction flask at reduced pressure
  11. customcollected at a temperature of 113-118° C. at 2.5 mm pressure
  12. customis 108-109° C. at 2 mm pressure

출처 및 근거

ORD 기록
ord-d82f17aa8cdf4903a31e095fdbb999b9
출처 데이터셋
uspto-grants-2012_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08222340B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트