홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethanol → Diethyl 1H-pyrrolo[2,3-B]pyridine-2,6-dicarboxylate

HRID 1521700
인쇄

반응식

HRID 1521700 반응식
[C:1]([O-:4])(=[O:3])[CH3:2].[Na+].[CH2:6]([O:8][C:9]([C:11]1[NH:20][C:14]2=[N:15]C(Cl)=[CH:17][CH:18]=[C:13]2[CH:12]=1)=[O:10])[CH3:7].[C]=O.[CH2:23](O)[CH3:24]>C1(P(C2C=CC=CC=2)[C-]2C=CC=C2)C=CC=CC=1.[C-]1(P(C2C=CC=CC=2)C2C=CC=CC=2)C=CC=C1.[Fe+2].C([O-])(=O)C.[Pd+2].C([O-])(=O)C>[NH:20]1[C:14]2=[N:15][C:2]([C:1]([O:4][CH2:23][CH3:24])=[O:3])=[CH:17][CH:18]=[C:13]2[CH:12]=[C:11]1[C:9]([O:8][CH2:6][CH3:7])=[O:10]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 702EthanolHCID 517045Sodium AcetateHCID 21868758Ethyl 6-chloro-1H-pyrrolo[2,3-b]pyridine-2-carboxylateHCID 178418416HCID 178418416, 화합물

생성물 1

HCID 67236396Diethyl 1H-pyrrolo[2,3-B]pyridine-2,6-dicarboxylate

시약·촉매·용매 2

HCID 167845
palladium(II) acetate
촉매
HCID 635956Ferrocene-1,1'-bis-(diphenylphosphine)촉매

반응 조건

온도
110 °C

실험 절차

Reagents are charged into a 600 mL autoclave in the following order: ethanol (350 mL), sodium acetate (17.0 g, 200 mmol), 6-chloro-1H-pyrrolo[2,3-b]pyridine-2-carboxylic acid ethyl ester (24 g, 107 mmol), 1,1′-bis-(diphenylphosphino)ferrocene (2.5 g, 2.25 mmol [2.25 mol %]), and palladium acetate (180 mg, 0.75 mmol [0.75 mol %]). The air in the autoclave is replaced with carbon monoxide and the pressure is adjusted to 250 psi. The reaction is then heated to 110° C. for 15 h. The reaction mixture is cooled to room temperature and is filtered through Celite. The solvent is replaced with 500 mL EtOAc followed by 100 mL aqueous wash. The organic layer is concentrated to 50 mL EtOAc and is then heated to 60° C. After cooling to room temperature, the solids are filtered to afford 20 g of the title compound. The mother liquor is concentrated and is purified by flash column chromatography using gradient elution of 20-60% ethyl acetate in hexanes to afford an additional 3.5 g of title compound which affords total of 23.5 g in 84% isolated yield.

후처리

  1. additionReagents are charged into a 600 mL autoclave in the following order
  2. temperatureThe reaction mixture is cooled to room temperature
  3. filtrationis filtered through Celite
  4. concentrationThe organic layer is concentrated to 50 mL EtOAc
  5. temperatureis then heated to 60° C
  6. temperatureAfter cooling to room temperature
  7. filtrationthe solids are filtered

출처 및 근거

ORD 기록
ord-32c0f72e8d024636bd4aefb4ea9ec82e
출처 데이터셋
uspto-grants-2015_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09073926B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트