홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Acetic Acid → HCID 68425498, 화합물

HRID 1527831
노트
인쇄 미리보기

반응식

HRID 1527831 반응식
[CH:1]1([C:4]2(O)[C:10]3[CH:11]=[CH:12][CH:13]=[CH:14][C:9]=3C=C(N3CCCCC3)[C:6]3[CH:21]=[CH:22][CH:23]=[CH:24][C:5]2=3)[CH2:3][CH2:2]1.[BrH:26].[C:27]([OH:30])(=O)[CH3:28]>C(#N)C>[Br:26][CH2:3][CH2:2][CH:1]=[C:4]1[C:10]2[CH:11]=[CH:12][CH:13]=[CH:14][C:9]=2[CH2:28][C:27](=[O:30])[C:6]2[CH:21]=[CH:22][CH:23]=[CH:24][C:5]1=2
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 176Acetic AcidHCID 260Hydrogen BromideHCID 103593635-Cyclopropyl-10-(1-piperidinyl)-5H-dibenzo[a,d]cyclohepten-5-ol

생성물 1

HCID 68425498HCID 68425498, 화합물

시약·촉매·용매 1

HCID 6342Acetonitrile용매

반응 조건

온도
100 °C

실험 절차

5-Cyclopropyl-10-piperidin-1-yl-5H-dibenzo[a,d]cyclohepten-5-ol (5) (69 mmol, 1.00 equiv.) was dissolved in 100 mL acetic acid, then 48% aqueous HBr (100 mL) was added and the resulting mixture was heated in a 100° C. oil bath. LC/MS analysis after 18 hours showed that the starting material was consumed. The mixture was diluted with H2O (100 mL) then extracted in a separatory funnel with ethyl ether (3×100 mL). The aqueous phase was discarded, after which the combined organic phases were washed with saturated sodium bicarbonate (3×50 mL). The aqueous phase was discarded, and the organic phase was filtered through a silica gel plug and concentrated under vacuum to obtain a thick brown oil, which was dissolved in acetonitrile (200 mL) and dried under vacuum. The residue was then dissolved in toluene (200 mL) and again dried under vacuum. The resulting crude 5-(3-bromo-propylidene)-5,11-dihydro-dibenzo[a,d]cyclohepten-10-one (6) was used without further purification in the next step. ESI MS m/z 327.0 (M+H)+. 1H NMR (d6-DMSO, 250 MHz): 7.98 (1H, d), 7.67-7.25 (7H, m), 5.76 (1H, t), 4.46 (1H, d), 3.73 (1H, d), 3.64 (2H, m), 2.83-2.50 (2H, m).

후처리

  1. customwas consumed
  2. additionThe mixture was diluted with H2O (100 mL)
  3. extractionthen extracted in a separatory funnel with ethyl ether (3×100 mL)
  4. washafter which the combined organic phases were washed with saturated sodium bicarbonate (3×50 mL)
  5. filtrationthe organic phase was filtered through a silica gel plug
  6. concentrationconcentrated under vacuum
  7. customto obtain a thick brown oil, which
  8. customdried under vacuum
  9. dissolutionThe residue was then dissolved in toluene (200 mL)
  10. customagain dried under vacuum
  11. customThe resulting crude 5-(3-bromo-propylidene)-5,11-dihydro-dibenzo[a,d]cyclohepten-10-one (6) was used without further purification in the next step

출처 및 근거

ORD 기록
ord-9d399cb31bb34792bc31b8247833ebd0
출처 데이터셋
uspto-grants-2015_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09090535B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트