홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Acetic Anhydride → CID 3084433

HRID 1532460
인쇄

반응식

HRID 1532460 반응식
[CH3:1][CH:2]1[CH2:6][CH2:5][O:4][CH2:3]1.[C:7](OC(=O)C)(=[O:9])C.[CH2:14]1COC[CH2:15]1>>[CH3:14][CH2:15][CH2:6][CH2:5][O:4][C@H:3]([CH2:7][OH:9])[CH2:2][CH3:1]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 3

HCID 7918Acetic AnhydrideHCID 8028TetrahydrofuranHCID 982303-Methyltetrahydrofuran

생성물 1

HCID 3084433CID 3084433

반응 조건

온도
5 °C

실험 절차

To a 500ml flask was added 154.9 g of THF, 50 g of 3-methyl tetrahydofuran and 8.9 g of 70 wt. % HClO4 aqueous solution. The solution was cooled to 5° C., titrated 48.0 g of acetic anhydride over 30 minutes, and then stirred for 8 hours at 5° C. After quenching the solution with 160.5 g of 17 wt. % aqueous solution of sodium hydroxide and stirring, the contents of the flask are allowed to settle and the water layer is removed. 50 g of 30 wt. % aqueous solution of sodium hydroxide is added to the oil layer, followed by heating to 120° C. to distill off the unreacted monomer, then 150 g of n-butanol are added and the solution is refluxed for 3 hours and saponificate the contents. After the contents are settled and the water layer is removed, 100 g of water is added to the oil layer. After heating the contents to reflux with constant stirring for 15 minutes, the contents of the flask are allowed to settle and cool, and, after the water layer is removed, the oil layer is rinsed by water. The oil layer is further rinsed 3 times by water adjusted to pH 2 to 3 by hydrochloric acid, by water adjusted to pH 3 to 4 and by non treated water and then the water layer is removed. After that, the oil layer is dried using a vacuum pump (10 to 20 mm Hg pressure) with heating to 120° C. and then PTMG can be obtained. The obtained polymer is transferred to the 100 ml standard bottle and the color number (JIS K-1557) is measured.

후처리

  1. customAfter quenching the solution with 160.5 g of 17 wt. % aqueous solution of sodium hydroxide
  2. stirringstirring
  3. customthe water layer is removed
  4. addition50 g of 30 wt. % aqueous solution of sodium hydroxide is added to the oil layer
  5. temperatureby heating to 120° C.
  6. distillationto distill off the unreacted monomer
  7. addition150 g of n-butanol are added
  8. temperaturethe solution is refluxed for 3 hours
  9. customthe water layer is removed
  10. addition100 g of water is added to the oil layer
  11. temperatureAfter heating the contents
  12. temperatureto reflux
  13. stirringwith constant stirring for 15 minutes
  14. temperaturecool
  15. customafter the water layer is removed
  16. washthe oil layer is rinsed by water
  17. washThe oil layer is further rinsed 3 times by water
  18. additionby non treated water
  19. customthe water layer is removed
  20. customAfter that, the oil layer is dried
  21. temperaturewith heating to 120° C.

출처 및 근거

ORD 기록
ord-80a41115304842de95af92f9146906a0
출처 데이터셋
uspto-grants-2001_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06201137B1

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트