홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 5-Nitronaphthalene-1,4-dione

HRID 1579672
인쇄

반응식

HRID 1579672 반응식
[N+:1]([C:4]1[CH:5]=[CH:6][CH:7]=[C:8]2[C:13]=1[C:12](=NO)[CH:11]=[CH:10][C:9]2=[O:16])([O-:3])=[O:2].Cl.[OH2:18]>C(C(C)=O)C.O.O.O.O.[Fe](Cl)Cl>[N+:1]([C:4]1[CH:5]=[CH:6][CH:7]=[C:8]2[C:13]=1[C:12](=[O:18])[CH:11]=[CH:10][C:9]2=[O:16])([O-:3])=[O:2]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 313Hydrochloric AcidHCID 962WaterHCID 178516261HCID 178516261, 화합물

생성물 1

HCID 123364025-Nitronaphthalene-1,4-dione

시약·촉매·용매 2

HCID 16211588Ferrous chloride tetrahydrate촉매HCID 6569Methyl Ethyl Ketone용매

반응 조건

온도
50 °C

실험 절차

5.5 g (0.025 mol) of 8-nitro-1,4-naphthoquinone-1-oxime and 21 g (0.11 mol) of iron (II) chloride tetrahydrate are heated to reflux temperature in 100 ml of methyl ethyl ketone. 25 g of hydrogen chloride gas are then introduced over a period of 20 minutes during which the sump temperature is kept at 87° to 90°C. The reaction mixture is stirred for another hour at this temperature, after which it is poured into 1000 ml of water heated to approximately 50°C, followed by stirring for 30 minutes at that temperature. The reaction product precipitated is then filtered off under suction. Recrystallization from toluene following the addition of 2 g of active carbon gives 4 g (78 percent of the theoretical yield) of 5-nitro-1,4-naphthoquinone melting at 164°C.

후처리

  1. customis kept at 87° to 90°C
  2. stirringby stirring for 30 minutes at that temperature
  3. customThe reaction product precipitated
  4. filtrationis then filtered off under suction
  5. customRecrystallization from toluene following
  6. additionthe addition of 2 g of active carbon
  7. customgives 4 g (78 percent of the

출처 및 근거

ORD 기록
ord-c04dc669b26b444a9d4128976fe220ef
출처 데이터셋
uspto-grants-1976_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US03931255

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트