홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sulfuric Acid → Chlorobenzene

HRID 1608001
인쇄

반응식

HRID 1608001 반응식
[C:1](#[N:4])[CH:2]=[CH2:3].[CH:5]1([OH:11])[CH2:10][CH2:9]CCC1.S(=O)(=O)(O)O.[Cl:17][C:18]1[CH:23]=[CH:22][CH:21]=[CH:20][CH:19]=1.NC(N)=[S:26]>O>[CH:1]1([NH:4][C:5](=[O:11])[CH2:10][CH2:9][SH:26])[CH2:23][CH2:18][CH2:19][CH2:3][CH2:2]1.[Cl:17][C:18]1[CH:23]=[CH:22][CH:21]=[CH:20][CH:19]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 1118Sulfuric AcidHCID 7964ChlorobenzeneHCID 2723790ThioureaHCID 86743397Acrylonitrile cyclohexanol

생성물 2

HCID 7964Chlorobenzene수율 72.4%HCID 14618019N-Cyclohexyl-3-sulfanylpropanamide

시약·촉매·용매 1

HCID 962
Water
용매

반응 조건

온도
20 °C

실험 절차

A pre-mix of acrylonitrile/cyclohexanol (13.3 g/25.1 g) and concentrated sulfuric acid (51.1 g) were added through two addition funnels into a flask containing chlorobenzene (60 g) at 45°-55° C. The mixture was then heated to 60°-70° C. for 3-5 hours and cooled to 20° C. when water (150 g) was added slowly. After 30 minutes stirring, thiourea (19 g) was added and the mixture brought to 60° C. for 1 hour. On cooling to 20° C., caustic (50%, 80 g) was added between 20b 60° C. C under nitrogen and held at 60° C. for 1 hour. The organic layer was separated and washed with warm water to yield 33.9 of N-cyclohexyl-3-mercaptopropionamide in chlorobenzene (72.4% yield).

후처리

  1. additionwere added through two addition funnels into a flask
  2. temperatureThe mixture was then heated to 60°-70° C. for 3-5 hours
  3. additionwas added slowly
  4. waitthe mixture brought to 60° C. for 1 hour
  5. waitC under nitrogen and held at 60° C. for 1 hour
  6. customThe organic layer was separated
  7. washwashed with warm water

출처 및 근거

ORD 기록
ord-b0211c5cf62d4da48e73c4e5860c546a
출처 데이터셋
uspto-grants-1989_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04868310

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트