홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium hydride → 6-(5-Ethoxy-2,2,3,3,4,4-hexafluoropentoxy)-2-hydroxynapthalene

HRID 1608897
인쇄

반응식

HRID 1608897 반응식
[H-].[Na+].C([O:10][C:11]1[CH:12]=[C:13]2[C:18](=[CH:19][CH:20]=1)[CH:17]=[C:16](O)[CH:15]=[CH:14]2)C1C=CC=CC=1.FC(F)(F)S([O:27][CH2:28][C:29]([F:41])([F:40])[C:30]([F:39])([F:38])[C:31]([F:37])([F:36])[CH2:32][O:33][CH2:34][CH3:35])(=O)=O>COCCOC>[CH2:34]([O:33][CH2:32][C:31]([F:36])([F:37])[C:30]([F:38])([F:39])[C:29]([F:40])([F:41])[CH2:28][O:27][C:16]1[CH:17]=[C:18]2[C:13](=[CH:14][CH:15]=1)[CH:12]=[C:11]([OH:10])[CH:20]=[CH:19]2)[CH3:35]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 24758Sodium hydrideHCID 144964736-(Benzyloxy)naphthalen-2-OLHCID 218325442,2,3,3,4,4-Hexafluoro-5-ethoxypentyl trifluoromethanesulfonate

생성물 1

HCID 200827456-(5-Ethoxy-2,2,3,3,4,4-hexafluoropentoxy)-2-hydroxynapthalene수율 42.9%

시약·촉매·용매 1

HCID 80711,2-Dimethoxyethane용매

실험 절차

0.7 g of 60% sodium hydride in mineral oil was added to 25 ml of dry 1,2-dimethoxyethane. The contents were stirred, and 2.5 g (0.010 moles) of 6-benzyloxy-2napthol was slowly added. After stirring the resulting solution for 20 minutes at room temperature, it was cooled with an ice bath. 4.1 g (0.011 moles) of 5-ethoxy-2,2,3,3,4,4-hexafluoropentyl trifluoromethanesulfonate (prepared essentially as in Example 3) was then added slowly. When this addition was complete, the ice bath was removed, and the product-containing mixture was stirred overnight at room temperature. The solvent was then removed under reduced pressure, and 30 ml of water, followed by 30 ml of diethyl ether, were added sequentially. Once all of the solids had dissolved, two homogeneous liquid layers formed. The layers were separated, and the aqueous layer was extracted twice with 25 ml aliquots of diethyl ether. The resulting ether layers were combined, washed three times with 20 ml aliquots of deionized water, dried with anhydrous magnesium sulfate, and stripped to dryness using a rotary evaporator. The resulting solid was dissolved in tetrahydrofuran and was hydrogenated at 60 psi in the presence of catalytic 10% palladium on carbon for 18 hours. When the hydrogenation was complete, the catalyst was removed by filtration, and the solvent was removed on a rotary evaporator. The resulting brown semisolid material was then purified by using chromatography on silica gel (2.5% methanol in chloroform) to yield 1.64 g of 6-(5-ethoxy-2,2,3,3,4,4-hexafluoropentoxy)-2-hydroxynapthalene product.

후처리

  1. stirringAfter stirring the resulting solution for 20 minutes at room temperature
  2. temperatureit was cooled with an ice bath
  3. additionwas then added slowly
  4. additionWhen this addition
  5. customthe ice bath was removed
  6. stirringthe product-containing mixture was stirred overnight at room temperature
  7. customThe solvent was then removed under reduced pressure, and 30 ml of water
  8. additionwere added sequentially
  9. dissolutionOnce all of the solids had dissolved
  10. customtwo homogeneous liquid layers formed
  11. customThe layers were separated
  12. extractionthe aqueous layer was extracted twice with 25 ml aliquots of diethyl ether
  13. washwashed three times with 20 ml aliquots of deionized water
  14. dry with materialdried with anhydrous magnesium sulfate
  15. customa rotary evaporator
  16. dissolutionThe resulting solid was dissolved in tetrahydrofuran
  17. customthe catalyst was removed by filtration
  18. customthe solvent was removed on a rotary evaporator
  19. customThe resulting brown semisolid material was then purified

출처 및 근거

ORD 기록
ord-1c884c3e68a946b78d012b080345f91f
출처 데이터셋
uspto-grants-1995_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05399291

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트