홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Triethylamine → Itaconamide

HRID 1633390
인쇄

반응식

HRID 1633390 반응식
[CH2:1]=[C:2]([CH2:6][C:7]([NH2:9])=[O:8])[C:3](O)=[O:4].C([N:12](CC)CC)C.ClC(OCC)=O>C(Cl)(Cl)Cl>[C:3]([NH2:12])(=[O:4])[C:2]([CH2:6][C:7]([NH2:9])=[O:8])=[CH2:1]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 8471TriethylamineHCID 10928Ethyl chloroformateHCID 418291(1-Carbamoylmethyl)acrylic acid

생성물 1

HCID 239162Itaconamide

시약·촉매·용매 1

HCID 6212Chloroform용매3회

반응 조건

온도
5 °C

실험 절차

38.7 grams (0.3 mole) of 2-methylenesuccinamic acid, prepared as described in Example 1, were dissolved in 150 ml of chloroform in a 500 ml. 3-necked round bottom flask equipped with a magnetic stirrer, condenser, drying tube, thermometer, and dropping funnel. The solution was cooled to about 5° C. and a mixture of 41.7 ml. (1 equivalent) of triethylamine and 90 ml. of chloroform was added dropwise over 1/2 hour to the stirring solution. The solution was then cooled to about -45° C. by means of a dry ice-acetone bath. A mixture of 28.5 ml. (1 equivalent) of ethyl chloroformate and 70 ml. of chloroform was added to the solution over a 1/2 hour period, maintaining the solution temperature at about -45° C. The reaction mixture was allowed to stir at -45° C., ±15° C., for an additional 2 hours. The reaction mixture was then transferred to a 1-liter 3-necked round bottom flask fitted with a mechanical stirrer, gas inlet, thermometer, condenser, and drying tube. The solution was maintained at -10° C. while ammonia gas was bubbled into the reaction mixture for 1/2 hour. Additional portions of chloroform, totaling 400 ml., were then added. The reaction mixture was allowed to warm to room temperature and the precipitated product was isolated by suction filtration and air-dried overnight. Repeated recrystallizations from water, methanol/water, and water gave 16.3 gms of itaconamide, a white solid melting at 226°-229° C.

후처리

  1. custom3-necked round bottom flask equipped with a magnetic stirrer, condenser
  2. customdrying tube
  3. additiona mixture of 41.7 ml
  4. temperatureThe solution was then cooled to about -45° C. by means of a dry ice-acetone bath
  5. additionA mixture of 28.5 ml
  6. temperaturemaintaining the solution temperature at about -45° C
  7. customThe reaction mixture was then transferred to a 1-liter 3-necked round bottom flask
  8. customfitted with a mechanical stirrer, gas inlet
  9. customthermometer, condenser, and drying tube
  10. temperatureThe solution was maintained at -10° C. while ammonia gas
  11. customwas bubbled into the reaction mixture for 1/2 hour
  12. addition, were then added
  13. temperatureto warm to room temperature
  14. customthe precipitated product was isolated by suction filtration
  15. customair-dried overnight
  16. customrecrystallizations from water, methanol/water, and water

출처 및 근거

ORD 기록
ord-361169dda2f64a96b7fda157f18c27eb
출처 데이터셋
uspto-grants-1984_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04480125

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트