홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acetic Acid → N-tert-butylhydroxylammonium acetate

HRID 1636092
인쇄

반응식

HRID 1636092 반응식
[C:1]([N+:5]([O-:13])=CC1C=CC=CC=1)([CH3:4])([CH3:3])[CH3:2].S(=O)(=O)(O)O.[C:19]([OH:22])(=[O:21])[CH3:20].[OH-].[Na+]>C1(C)C=CC=CC=1.O.C(OCC)(=O)C>[C:19]([O-:22])(=[O:21])[CH3:20].[C:1]([NH2+:5][OH:13])([CH3:4])([CH3:3])[CH3:2]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 176Acetic AcidHCID 1118Sulfuric AcidHCID 4390N-tert-Butyl-a-phenylnitrone2회HCID 14798Sodium Hydroxide

생성물 1

HCID 86585825N-tert-butylhydroxylammonium acetate수율 94.4%

시약·촉매·용매 3

HCID 962Water용매2회
HCID 1140Toluene용매
HCID 8857Ethyl Acetate용매

실험 절차

N-tert-butylphenylnitrone (44.8 g, 0.25 mol) was dissolved in toluene (134 g) in a 500 ml bottle. Sulphuric acid (27.5 g, 95 to 97%, 0.27 mol, 1.1 equiv.) was diluted in water (134 g) and added to the reaction bottle. The two-phase mixture was then heated to +50° C. and stirred vigorously for approximately 2 h. At that time, GC indicated that only 0.2 area % of N-tert-butylphenylnitrone remained. After cooling to +20° C., the dark red organic phase was discarded and the clear, yellow water phase was extracted once with toluene (46 g). To the remaining water phase was then added acetic acid (14.8 g, 0.25 mol, 1.0 equiv.) followed by sodium hydroxide (45% aqueous solution) until the pH of the water phase was approximately 5.5. Ethyl acetate (224 g) was then added and the mixture was stirred vigorously. The organic phase was then separated and the aqueous phase was extracted once more with ethyl acetate. The combined organic fractions were then evaporated to leave an oil (35.2 g). This material was purified by distillation under reduced pressure. A stable distillation point was achieved at 19 mbar/ +78° C. Fraction 1, retrieved below +70° C., contained 2.7 g and fraction 2, collected between +70° C. and +80° C., con a highly viscous oil (28.7 g, 76%) that crystallized as a white solid upon standing. pKa 6.4 Chromatographic purity (GC): 99.4 area %

후처리

  1. additionadded to the reaction bottle
  2. temperatureThe two-phase mixture was then heated to +50° C.
  3. temperatureAfter cooling to +20° C.
  4. extractionthe clear, yellow water phase was extracted once with toluene (46 g)
  5. stirringthe mixture was stirred vigorously
  6. customThe organic phase was then separated
  7. extractionthe aqueous phase was extracted once more with ethyl acetate
  8. customThe combined organic fractions were then evaporated

출처 및 근거

ORD 기록
ord-5ebe1a34d9204ee1ae9db1034c7bc68a
출처 데이터셋
uspto-grants-2003_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06512143B1

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트