4-Chlorobenzenesulfonamide → 1,1-Dimethylethyl 4-[(4-chlorophenyl)sulfonylaminocarbonyl]benzoate

HRID 1638552

반응식

HRID 1638552 반응식
[C:1]([O:5][C:6](=[O:16])[C:7]1[CH:15]=[CH:14][C:10]([C:11]([OH:13])=O)=[CH:9][CH:8]=1)([CH3:4])([CH3:3])[CH3:2].[Cl:17][C:18]1[CH:23]=[CH:22][C:21]([S:24]([NH2:27])(=[O:26])=[O:25])=[CH:20][CH:19]=1>CN(C)C1C=CN=CC=1.C(Cl)Cl>[Cl:17][C:18]1[CH:19]=[CH:20][C:21]([S:24]([NH:27][C:11]([C:10]2[CH:9]=[CH:8][C:7]([C:6]([O:5][C:1]([CH3:2])([CH3:3])[CH3:4])=[O:16])=[CH:15][CH:14]=2)=[O:13])(=[O:25])=[O:26])=[CH:22][CH:23]=1

참가 물질

5

반응물 2

HCID 668244-ChlorobenzenesulfonamideHCID 27609544-(tert-Butoxycarbonyl)benzoic acid

생성물 1

HCID 545475071,1-Dimethylethyl 4-[(4-chlorophenyl)sulfonylaminocarbonyl]benzoate수율 122%

시약·촉매·용매 2

HCID 142844-(Dimethylamino)pyridine촉매HCID 6344Dichloromethane용매2회

실험 절차

A 5-liter 3-neck round bottom flask was equipped with a mechanical stirrer and nitrogen inlet. Methylene chloride (2 liters) was placed in the reaction flask and terephthalic acid mono-t-butyl ester (127.5 g), 4-dimethylaminopyridine (70.06 g), and 4-chlorobenzenesulfonamide (110.04 g) were added sequentially using methylene chloride (400 ml) to wash down the solids. 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride was added in portions over 10 min using methylene chloride (100 ml) to wash down the solid. After the reaction mixture was stirred overnight at room temperature, it was evaporated to dryness. The residue was partitioned between ethyl acetate and water. The organic solution was washed with 20% (w/v) aqueous citric acid, saturated aqueous NaHCO3 and brine; dried (Na2SO4); and evaporated to a white solid. After drying in a vacuum oven at 50°, the ester (277 g, 100%) was obtained in a sufficiently pure state to be used directly for the next step; TLC, Rf =0.43, methanol:chloroform (15:85). (Further purification was possible by recrystallization from ethanol/water; mp above 300°).

후처리

  1. customA 5-liter 3-neck round bottom flask was equipped with a mechanical stirrer and nitrogen inlet
  2. washto wash down the solids
  3. addition1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride was added in portions over 10 min
  4. washto wash down the solid
  5. customit was evaporated to dryness
  6. customThe residue was partitioned between ethyl acetate and water
  7. washThe organic solution was washed with 20% (w/v) aqueous citric acid, saturated aqueous NaHCO3 and brine
  8. dry with materialdried (Na2SO4)
  9. customand evaporated to a white solid
  10. customAfter drying in a vacuum oven at 50°

출처 및 근거

ORD 기록
ord-5ada9057b0c34269a5af2e90a0b9ce6e
출처 데이터셋
uspto-grants-1989_11
특허 번호
US04880780

연결된 노트

불러오는 중…