홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1-(5-Bromo-2-methoxyphenyl)adamantane → 1,1'-(4,4'-Bis(methoxy)biphenyl-3,3'-diyl)bis(tricyclo(3.3.1.13,7)decane)

HRID 1643527
인쇄

반응식

HRID 1643527 반응식
Br[C:2]1[CH:3]=[CH:4][C:5]([O:18][CH3:19])=[C:6]([C:8]23[CH2:17][CH:12]4[CH2:13][CH:14]([CH2:16][CH:10]([CH2:11]4)[CH2:9]2)[CH2:15]3)[CH:7]=1>CC([O-])=O.CC([O-])=O.[Pd+2].O1CCCC1>[C:8]12([C:6]3[CH:7]=[C:2]([C:2]4[CH:3]=[CH:4][C:5]([O:18][CH3:19])=[C:6]([C:8]56[CH2:9][CH:10]7[CH2:16][CH:14]([CH2:13][CH:12]([CH2:11]7)[CH2:17]5)[CH2:15]6)[CH:7]=4)[CH:3]=[CH:4][C:5]=3[O:18][CH3:19])[CH2:17][CH:12]3[CH2:13][CH:14]([CH2:16][CH:10]([CH2:11]3)[CH2:9]1)[CH2:15]2
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 1

HCID 32850241-(5-Bromo-2-methoxyphenyl)adamantane

생성물 1

HCID 248802441,1'-(4,4'-Bis(methoxy)biphenyl-3,3'-diyl)bis(tricyclo(3.3.1.13,7)decane)수율 79.9%

시약·촉매·용매 2

HCID 167845palladium(II) acetate촉매HCID 8028Tetrahydrofuran용매

실험 절차

Next, 0.03 g of Pd(OAc)2 and 3.5 g of 1-(5-bromo-2-methoxyphenyl) adamantane were added to the mixture, followed by 25 mL of tetrahydrofuran in order to improve agitation, and the mixture was heated at reflux for approximately 24 hours. The resulting mixture was then evaporated to dryness and poured into 103 mL of 0.015 N HCl. Next, 150 mL of dichloromethane and 100 mL of water were added to yield a mixture consisting of a solid, an aqueous layer and an organic layer. The mixture was then filtered to separate the solid, the aqueous layer was discarded, and the organic layer was washed with 200 mL of water and decanted again. This process was repeated twice on the filtered solid. The three collected organic layers were evaporated to dryness, washed in methanol, and dried to yield 2.1 g of 3,3′-diadamantyl-4,4′-dimethoxybiphenyl (yield: 39.9%). Analytical data: Melting point: 288.1-289.1° C.; Elemental analysis: C 83.63%, H 8.73%; 1H-NMR (300 MHz, CDCl3): δ 1.78 (broad s, 12H), 2.08 (broad s, 6H), 2.15 (broad s, 12H), 3.86 (s, 6H), 6.92 (dm, 2H, J=8.1 Hz), 7.34 (dd, 2H, J=2.4, 8.1 Hz), 7.39 (d, 2H, J=2.4 Hz); 13C-NMR (75.4 MHz, CDCl3): δ 29.2, 37.1, 37.2, 40.6, 55.1, 111.9, 125.0, 125.5, 134.0, 138.5, 157.8; MS (EI, 70 eV): m/z=484 (6), 483 (36), 412 (1,100), 410 (5), 347 (8), 135 (22), 107 (7), 93 (14), 79 (17), 67 (9), 55 (6); IR (Selected absorption bands): 2992, 2964, 2898, 2850, 1603 cm−1.

후처리

  1. temperaturethe mixture was heated
  2. temperatureat reflux for approximately 24 hours
  3. customThe resulting mixture was then evaporated to dryness
  4. additionpoured into 103 mL of 0.015 N HCl
  5. additionNext, 150 mL of dichloromethane and 100 mL of water were added
  6. customto yield a mixture
  7. filtrationThe mixture was then filtered
  8. customto separate the solid
  9. washthe organic layer was washed with 200 mL of water
  10. customdecanted again
  11. customThe three collected organic layers were evaporated to dryness
  12. washwashed in methanol
  13. customdried

출처 및 근거

ORD 기록
ord-db32cc48d97e46dd94406a44fff89893
출처 데이터셋
uspto-grants-2012_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08119834B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트