홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

N,N-Diethylaniline → 7-Chloro-2,5-dimethylpyrazolo(1,5-a)pyrimidine

HRID 1660732
인쇄

반응식

HRID 1660732 반응식
[CH3:1][C:2]1[NH:3][N:4]2[C:9](=O)[CH:8]=[C:7]([CH3:11])[N:6]=[C:5]2[CH:12]=1.C(N(CC)C1C=CC=CC=1)C.P(Cl)(Cl)([Cl:26])=O.OP([O-])([O-])=O.[K+].[K+]>O.COC(C)(C)C.O1CCOCC1>[Cl:26][C:9]1[N:4]2[N:3]=[C:2]([CH3:1])[CH:12]=[C:5]2[N:6]=[C:7]([CH3:11])[CH:8]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 7061N,N-DiethylanilineHCID 24450Potassium Phosphate, DibasicHCID 24813Phosphorus oxychlorideHCID 7361992,5-dimethyl-4H,7H-pyrazolo(1,5-a)pyrimidin-7-one

생성물 1

HCID 184069877-Chloro-2,5-dimethylpyrazolo(1,5-a)pyrimidine수율 93.4%

시약·촉매·용매 3

HCID 962
Water
용매
HCID 15413tert-Butyl methyl ether용매
HCID 312751,4-Dioxane용매

반응 조건

온도
22 °C

실험 절차

Add 2,5-dimethylpyrazolo[1,5-a]pyrimidin-7-one (20 g, 122 mmol) to 1,4-dioxane (60 mL). Stir the mixture at 22° C. for 10 min and then add N,N-diethylaniline (20.8 mL, 128 mmol). Stir for an additional 5 min and then add phosphorus oxychloride (11.7 mL, 126 mmol) over 15 min. Stir the mixture at 22° C. for 15 min, then heat to 80-85° C. over 35 min and hold the reaction at this temperature for 1.5 h. Add the cooled reaction mixture slowly to a solution of potassium phosphate dibasic (106.7 g, 612.82 mmol) in water (325 mL) cooled to 0-5° C., keeping the temperature below 5° C. during the addition. Stir the mixture at 22° C. and then add methyl-t-butyl ether (150 mL). Separate the organic layer and extract the aqueous layer with methyl-t-butyl ether (2×100 mL). Combine the organic portions, dry over sodium sulfate, filter, and evaporate the solvent. Purify by silica gel chromatography, eluting with hexanes/ethyl acetate (2/1) to provide the title compound as a yellow solid (20.7 g, 88%). ES/MS m/z (35Cl) 182 (M+1)+.

후처리

  1. stirringStir for an additional 5 min
  2. stirringStir the mixture at 22° C. for 15 min
  3. temperatureheat to 80-85° C. over 35 min
  4. customthe reaction at this temperature for 1.5 h
  5. additionAdd
  6. temperaturecooled to 0-5° C.
  7. customthe temperature below 5° C.
  8. additionduring the addition
  9. stirringStir the mixture at 22° C.
  10. customSeparate the organic layer
  11. extractionextract the aqueous layer with methyl-t-butyl ether (2×100 mL)
  12. dry with materialCombine the organic portions, dry over sodium sulfate
  13. filtrationfilter
  14. customevaporate the solvent
  15. customPurify by silica gel chromatography
  16. washeluting with hexanes/ethyl acetate (2/1)

출처 및 근거

ORD 기록
ord-119eea6d023f466ca8f60e9425591abd
출처 데이터셋
uspto-grants-2011_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08030304B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트