홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium hydride → N,N-dimethyl-2-chloro-5-[3,6-dihydro-4-trifluoromethyl-2,6-dioxo-1(2H)-pyrimidinyl]-benzenesulfonamide

HRID 1681100
인쇄

반응식

HRID 1681100 반응식
[H-].[Na+].[NH2:3][C:4]([C:11]([F:14])([F:13])[F:12])=[CH:5][C:6]([O:8]CC)=O.[CH3:15][N:16]([CH3:30])[S:17]([C:20]1[CH:25]=[C:24]([N:26]=[C:27]=[O:28])[CH:23]=[CH:22][C:21]=1[Cl:29])(=[O:19])=[O:18]>O1CCCC1>[CH3:15][N:16]([CH3:30])[S:17]([C:20]1[CH:25]=[C:24]([N:26]2[C:6](=[O:8])[CH:5]=[C:4]([C:11]([F:12])([F:13])[F:14])[NH:3][C:27]2=[O:28])[CH:23]=[CH:22][C:21]=1[Cl:29])(=[O:19])=[O:18]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 24758Sodium hydrideHCID 136209Ethyl 3-amino-4,4,4-trifluoro-2-butenoateHCID 18993674N,N-dimethyl-2-chloro-5-isocyanatobenzenesulfonamide

생성물 1

HCID 18993677N,N-dimethyl-2-chloro-5-[3,6-dihydro-4-trifluoromethyl-2,6-dioxo-1(2H)-pyrimidinyl]-benzenesulfonamide

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매3회

반응 조건

온도
-5 °C

실험 절차

To 30 ml of dried tetrahydrofuran (THF) cooled to -5° C. was added, under nitrogen, 3.6 g of sodium hydride as a 60% dispersion mineral oil. To the stirred slurry was added a solution of 10 g of ethyl 3-amino-4,4,4-trifluoro-2-butenoate in 30 ml of THF over a period of 30 minutes. After stirring at -5° C. for 1 hour, the reaction mixture was cooled to -65° C. and a solution of N, N-dimethyl-2-chloro-5-isocyanatobenzenesulfonamide (Example A-4 above) in 30 ml of THF was added dropwise maintaining the temperature below -60° C. The mixture was stirred at -65° C. for 2 hours and allowed to warm to room temperature. After stirring for 17 hours, solvent was removed using a rotary evaporator. About 50 ml of water was added to the residue. The resulting mixture was filtered to remove a small amount of undissolved solid and the filtrate was acidified with hydrochloric acid. The resulting precipitate was filtered to give 13 g of the title compound as a beige solid, m.p. 281°-283° C.

후처리

  1. additionwas added, under nitrogen
  2. temperaturethe reaction mixture was cooled to -65° C.
  3. temperaturemaintaining the temperature below -60° C
  4. stirringThe mixture was stirred at -65° C. for 2 hours
  5. temperatureto warm to room temperature
  6. stirringAfter stirring for 17 hours
  7. customsolvent was removed
  8. customa rotary evaporator
  9. additionAbout 50 ml of water was added to the residue
  10. filtrationThe resulting mixture was filtered
  11. customto remove a small amount of undissolved solid
  12. filtrationThe resulting precipitate was filtered

출처 및 근거

ORD 기록
ord-8e9516ef5f54497fba2c7bc1b99c3d64
출처 데이터셋
uspto-grants-1992_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05169430

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트