홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Methylhydrazine → 3-(Difluoromethyl)-1-methyl-1H-pyrazole

HRID 1692038
노트
인쇄 미리보기

반응식

HRID 1692038 반응식
[F:1][CH:2]([F:10])[C:3](=O)[CH:4]=[CH:5]OCC.FC(F)C(=O)CC(OCC)OCC.[CH3:24][NH:25][NH2:26]>C(O)(=O)C>[F:1][CH:2]([F:10])[C:3]1[CH:4]=[CH:5][N:25]([CH3:24])[N:26]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 6061MethylhydrazineHCID 539937571,1-Difluoro-4-ethoxy-3-buten-2-oneHCID 866432981,1-Difluoro-4,4-diethoxy-2-butanone

생성물 1

HCID 542410613-(Difluoromethyl)-1-methyl-1H-pyrazole수율 75.5%

시약·촉매·용매 1

HCID 176Acetic Acid용매2회

반응 조건

온도
22 °C

실험 절차

At 22° C., a solution of 45 g of an 85.6% strength mixture comprising 1,1-difluoro-4-ethoxy-3-buten-2-one (0.164 mol) and 1,1-difluoro-4,4-diethoxy-2-butanone (0.071 mol) in a ratio of 2.3/1 in acetic acid (30 ml) was added dropwise over a period of 37 min to a solution of methylhydrazine (99% pure, 11.9 g, 0.258 mol) in acetic acid (460 ml). The resulting reaction solution was stirred at 22° C. for 19 h. The acetic acid was then removed under reduced pressure (43° C./30 mbar). The oily residue was taken up in methyl tert-butyl ether (MTBE, 300 ml) and washed with water (250 ml). The aqueous phase was extracted once with MTBE (150 ml). The collected organic solutions were dried over sodium sulfate, filtered and freed from the solvent under reduced pressure (40° C./400 to 30 mbar). The residue (23.5 g) was subjected to fractional distillation to isolate the product. The main fraction (21.5 g; transition temperature 52° C. at 22 mbar) contained 3-difluoro-N-methylpyrazole and 5-difluoro-N-methylpyrazole in a ratio of 2.6:1 (GC retention times: 5-isomer: 7.6 min; 3-isomer: 9.2 min). Taking into account the amounts of product found in the minor fractions and the cold traps, the yield is 75.5% (sum of both isomers).

후처리

  1. customThe resulting reaction solution
  2. customThe acetic acid was then removed under reduced pressure (43° C./30 mbar)
  3. washwashed with water (250 ml)
  4. extractionThe aqueous phase was extracted once with MTBE (150 ml)
  5. dry with materialThe collected organic solutions were dried over sodium sulfate
  6. filtrationfiltered
  7. customfreed from the solvent under reduced pressure (40° C./400 to 30 mbar)
  8. distillationThe residue (23.5 g) was subjected to fractional distillation
  9. customto isolate the product
  10. customThe main fraction (21.5 g; transition temperature 52° C. at 22 mbar)
  11. customin a ratio of 2.6:1 (GC retention times: 5-isomer: 7.6 min; 3-isomer: 9.2 min)

출처 및 근거

ORD 기록
ord-96ec873831ad427fb59a4b76e9bae77b
출처 데이터셋
uspto-grants-2012_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08153820B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트