홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

L-Malic Acid → (R)-3-((E)-2-(pyrrolidin-3-yl)vinyl)-5-(tetrahydro-2H-pyran-4-yloxy)pyridine

HRID 1692055
인쇄

반응식

HRID 1692055 반응식
C(O)(=O)[C@H](CC(O)=O)O.C(O)(=O)[C@H](CC(O)=O)O.[NH:19]1[CH2:23][CH2:22][C@H:21](/[CH:24]=[CH:25]/[C:26]2[CH:27]=[N:28][CH:29]=[C:30]([O:32][CH:33]3[CH2:38][CH2:37][O:36][CH2:35][CH2:34]3)[CH:31]=2)[CH2:20]1>CC(O)C>[NH:19]1[CH2:23][CH2:22][C@H:21](/[CH:24]=[CH:25]/[C:26]2[CH:27]=[N:28][CH:29]=[C:30]([O:32][CH:33]3[CH2:38][CH2:37][O:36][CH2:35][CH2:34]3)[CH:31]=2)[CH2:20]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 222656L-Malic AcidHCID 131729627(R)-3-((E)-2-(pyrrolidin-3-yl)vinyl)-5-(tetrahydro-2H-pyran-4-yloxy)pyridine mono-L-malate salt

생성물 1

HCID 11608784(R)-3-((E)-2-(pyrrolidin-3-yl)vinyl)-5-(tetrahydro-2H-pyran-4-yloxy)pyridine

시약·촉매·용매 1

HCID 3776Isopropanol용매2회

반응 조건

온도
72.5 °C

실험 절차

A solution of (R)-3-((E)-2-(pyrrolidinium-3-yl)vinyl)-5-(tetrahydro-2H-pyran-4-yloxy)pyridinium oxalate (380 g) in de-ionized water (2.6 L) was stirred and cooled to around 10° C. with an ice bath. Aqueous sodium hydroxide (0.40 L of 25%) was added over a period of 15 min, keeping the temperature below 30° C. Chloroform (1.6 L) was then added, and the mixture was stirred vigorously for 20 min and filtered to remove insoluble sodium oxalate. The layers were allowed to separate, and the chloroform layer was combined with Silicycle Si-Thiol® (21.6 g). The mixture was stirred and heated at 50-55° C. for 3-4 h, cooled to ambient temperature and filtered. The filtrate was concentrated under reduced pressure to produce a light red viscous oil (221 g). A portion of this free base (216 g) was dissolved in 2-propanol (1.2 L), heated to 70-75° C. and treated with solid L-malic acid (106 g), using a 2-propanol rinse (100 mL) to aid transfer. Dissolution of the solid produced an exotherm of 5-7° C. over 3-5 min. The mixture was kept at 75-78° C. for 10 min, to ensure complete dissolution of the solids, and then cooled slowly to ambient temperature (90 min). As the temperature approached 65° C., the solution was seeded with a few crystals of (R)-3-((E)-2-(pyrrolidin-3-yl)vinyl)-5-(tetrahydro-2H-pyran-4-yloxy)pyridine mono-L-malate salt. After stirring at ambient temperature for 1 h, the suspension was filtered. The collected solids were washed with 2-propanol (2×0.80 L), air dried for 30 minutes, and vacuum dried at 78° C. for 8 h. The resulting off-white material weighed 297 g and was >99% pure by HPLC.

후처리

  1. washrinse (100 mL)
  2. dissolutionDissolution of the solid
  3. customproduced an exotherm of 5-7° C. over 3-5 min
  4. dissolutiondissolution of the solids
  5. temperaturecooled slowly to ambient temperature (90 min)
  6. customapproached 65° C.
  7. filtrationthe suspension was filtered
  8. washThe collected solids were washed with 2-propanol (2×0.80 L), air
  9. customdried for 30 minutes
  10. customvacuum dried at 78° C. for 8 h

출처 및 근거

ORD 기록
ord-3b6319c35dc049e7a54eb8065cd5d2d2
출처 데이터셋
uspto-grants-2012_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08153821B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트