홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

2,5-Dichlorothiophene → 2,5-Dichlorothiophene-3-carbaldehyde

HRID 1700634
인쇄

반응식

HRID 1700634 반응식
[Cl:1][C:2]1[S:3][C:4]([Cl:7])=[CH:5][CH:6]=1.Cl[CH:9]([O:11]C)Cl>ClCCl.[Ti](Cl)(Cl)(Cl)Cl>[Cl:1][C:2]1[S:3][C:4]([Cl:7])=[CH:5][C:6]=1[CH:9]=[O:11]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 185012,5-DichlorothiopheneHCID 21004Methane, dichloromethoxy-

생성물 1

HCID 27971062,5-Dichlorothiophene-3-carbaldehyde수율 97.2%

시약·촉매·용매 2

HCID 24193Titanium Tetrachloride촉매HCID 6344Dichloromethane용매2회

실험 절차

To a solution of 2,5-dichlorothiophene (100.0 g) and dichloromethylmethylether (165.3 g) in dichloromethane (800 ml) was added dropwise a solution of titanium tetrachloride (272.7 g) in dichloromethane (160 ml) at −10 to −15° C. taking 50 minutes, and at the same temperature, the mixture was stirred for 30 minutes. The reaction solution was poured into ice, and the organic layer was washed with water, sodium hydrogen carbonate solution, water and saturated brine, and dried with magnesium sulfate. Under reduced pressure, the solvent was evaporated to give 2,5-dichloro-3-formylthiophene (115.0 g) as oil. To a mixture of acetone (1000 ml), sodium hydroxide (28.6 g) and water (1200 ml) was added at 0° C. a solution of 2,5-dichloro-3-formylthiophene (58.6 g) in acetone (200 ml) for 1.5 hours, and the mixture was stirred at the same temperature for 1 hour. Under reduced pressure, acetone was evaporated, and the crystals were filtered, washed with water and dried to give 4-(2,5-dichlorothiophen-3-yl)-3-buten-2-one (136.6 g). To a solution of 20% sodium ethoxide in ethanol (211 g) was added diethyl malonate (99.3 g) at room temperature, and then 4-(2,5-dichlorothiophen-3-yl)-3-buten-2-one (136.6 g) little by little. The mixture was stirred at room temperature for 30 minutes, heated for 2 hours while stirring, and cooled. The solvent was evaporated, and to the residue was added water. The aqueous layer was washed with ethyl acetate and concentrated, to which was added 2M sodium hydroxide (340 ml). The mixture was stirred at 100° C. for 2 hours and cooled. To the mixture was added 2.5M sulfuric acid (340 ml) for 15 minutes, and the mixture was stirred at 100° C. for 1.5 hours. The mixture was cooled, and precipitated crystals were filtered and washed with ethyl acetate-isopropylether (1:4) and isopropylether to give 5-(2,5-dichlorothiophen-3-yl)cyclohexane-1,3-dione (78.9 g) as colorless crystals.

후처리

  1. additionThe reaction solution was poured into ice
  2. washthe organic layer was washed with water, sodium hydrogen carbonate solution, water and saturated brine
  3. dry with materialdried with magnesium sulfate
  4. customUnder reduced pressure, the solvent was evaporated

출처 및 근거

ORD 기록
ord-3f99455cb715453fbedaa63a906cf52b
출처 데이터셋
uspto-grants-2002_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06350749B1

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트