홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dimethyl Carbonate → Methyl 3-(2-methoxyphenyl)-3-oxopropanoate

HRID 1707759
인쇄

반응식

HRID 1707759 반응식
[CH2:1]([O-:3])C.[Na+].CO[CH2:7][C:8]([C:10]1[CH:15]=[CH:14][CH:13]=[CH:12][CH:11]=1)=[O:9].[C:16](=[O:21])(OC)[O:17][CH3:18]>>[CH3:1][O:3][C:15]1[CH:14]=[CH:13][CH:12]=[CH:11][C:10]=1[C:8]([CH2:7][C:16]([O:17][CH3:18])=[O:21])=[O:9]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 3

HCID 12021Dimethyl Carbonate2회HCID 776982-Methoxy-1-phenylethanoneHCID 2723922Sodium ethoxide

생성물 1

HCID 2759697Methyl 3-(2-methoxyphenyl)-3-oxopropanoate

실험 절차

58.5 g (1.08 mol) of sodium ethanolate are added to 500 ml of dimethyl carbonate. The mixture is then heated to boiling and traces of methanol are removed by distillation. 153.5 g (1.02 mol) of 2-methoxyacetophenone are allowed to drip in at 86° C. with vigorous stirring during the course of 4.5 hours. (If the reaction mixture becomes too viscous, a further addition of dimethyl carbonate is recommended.) The mixture is then subsequently stirred for a further 30 minutes and the solvent is removed by distillation under reduced pressure. After cooling to room temperature, 350 ml of water and 70 ml of glacial acetic acid are added and the mixture is stirred overnight. The oil formed is separated off and the aqueous phase is extracted by shaking with a total of 300 ml of ethyl acetate. The combined organic phases are first washed with a 6% strength sodium hydrogen carbonate solution (100 ml), then with a sodium chloride solution (the sodium chloride promotes the phase separation). After drying the ethyl acetate phase over sodium sulfate, filtration and after removing the solvent on a rotary evaporator, the remaining oil is distilled in a high vacuum.

후처리

  1. temperatureThe mixture is then heated
  2. customtraces of methanol are removed by distillation
  3. customto drip in at 86° C.
  4. stirring) The mixture is then subsequently stirred for a further 30 minutes
  5. customthe solvent is removed by distillation under reduced pressure
  6. addition350 ml of water and 70 ml of glacial acetic acid are added
  7. stirringthe mixture is stirred overnight
  8. customThe oil formed
  9. customis separated off
  10. extractionthe aqueous phase is extracted
  11. stirringby shaking with a total of 300 ml of ethyl acetate
  12. washThe combined organic phases are first washed with a 6% strength sodium hydrogen carbonate solution (100 ml)
  13. customthe phase separation)
  14. dry with materialAfter drying the ethyl acetate phase
  15. filtrationover sodium sulfate, filtration
  16. customafter removing the solvent
  17. customon a rotary evaporator
  18. distillationthe remaining oil is distilled in a high vacuum

출처 및 근거

ORD 기록
ord-3cc7b8b6caad483f9a51832ea961d471
출처 데이터셋
uspto-grants-1994_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05354869

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트