Butyl bromide → 4-Butoxy-2,6-dimethylazobenzene

HRID 1732237노트

반응식

HRID 1732237 반응식
[Na].[CH3:2][C:3]1[CH:8]=[C:7]([OH:9])[CH:6]=[C:5]([CH3:10])[C:4]=1[N:11]=[N:12][C:13]1[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=1.Br[CH2:20][CH2:21][CH2:22][CH3:23]>C(O)C>[CH2:20]([O:9][C:7]1[CH:6]=[C:5]([CH3:10])[C:4]([N:11]=[N:12][C:13]2[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=2)=[C:3]([CH3:2])[CH:8]=1)[CH2:21][CH2:22][CH3:23]

참가 물질

5

실험 절차

To a solution of sodium (2.0 g, 0.09 mole) in absolute ethanol (119 ml) was added 2,6-dimethyl-4-hydroxyazobenzene (18.3 g, 0.08 mole) prepared according to B. C. Saunders and G. H. R. Watson, Biochem. J. 46:629-233 (1950). To the resulting orange-red solution was added 1-bromobutane (22.3 g, 0.162 mole) slowly from a separatory funnel and the mixture was refluxed for five hours. When cool, the precipitated sodium bromide was filtered off and the filtrate was evaporated to dryness. The residue was taken up in ether and the ether solution was extracted, first with 0.5 M sodium hydroxide and then once with water. The ether phase was dried (Na2SO4), filtered, and evaporated to dryness. The yield was over 90%. This material is satisfactory for the next step. After recrystallization from 95% ethanol, it melted at 47°-47.5° C.

후처리

  1. customprepared
  2. temperaturethe mixture was refluxed for five hours
  3. temperatureWhen cool
  4. filtrationthe precipitated sodium bromide was filtered off
  5. customthe filtrate was evaporated to dryness
  6. extractionthe ether solution was extracted, first with 0.5 M sodium hydroxide
  7. dry with materialThe ether phase was dried (Na2SO4)
  8. filtrationfiltered
  9. customevaporated to dryness
  10. customAfter recrystallization from 95% ethanol, it melted at 47°-47.5° C.

출처 및 근거

ORD 기록
ord-bde386deda1b421894e6605daaa7c3d2
출처 데이터셋
uspto-grants-1980_12
특허 번호
US04237068

반응 노트

불러오는 중…