3,5-Dichloropentan-2-one → 3-Thiocyanato-5-chloro-2-pentanone

HRID 1734756노트

반응식

HRID 1734756 반응식
Cl[CH:2]([CH2:6][CH2:7][Cl:8])[C:3](=[O:5])[CH3:4].[C:9]([S-:11])#[N:10].[K+]>CC(C)=O>[S:11]([CH:2]([CH2:6][CH2:7][Cl:8])[C:3](=[O:5])[CH3:4])[C:9]#[N:10]

참가 물질

4

반응물 2

HCID 940323,5-Dichloropentan-2-oneHCID 516872Potassium thiocyanate

생성물 1

HCID 108776933-Thiocyanato-5-chloro-2-pentanone수율 93%

시약·촉매·용매 1

HCID 180Acetone용매

실험 절차

77.8 g (0.5 moles) of 3,5-dichloro-2-pentanone [prepared according to Acta Chim. Hung. 3, 157 (1953)] are added to the solution of 49.9 g (0.513 moles) of potassium rhodanide in 500 ml of acetone. The solution is boiled under stirring for 4 hours. The reaction mixture is cooled to room temperature and the precipitated potassium chloride is filtered off and washed with acetone. The filtrate is evaporated, the residue is dissolved in benzene and the benzene solution is washed 3 times with water. After drying with sodium sulphate, the benzene is distilled off. 62.2 g (93%) of 3-thiocyanato-5-chloro-2-pentanone are obtained in the form of a red oil. After distilling at a lower pressure a faint yellow oil is obtained, its boiling point is 112° C. at a pressure of 26.6 Pa, nD20 =1.5110. According to infrared spectrum it does not contain any isothiocyanate.

후처리

  1. filtrationthe precipitated potassium chloride is filtered off
  2. washwashed with acetone
  3. customThe filtrate is evaporated
  4. dissolutionthe residue is dissolved in benzene
  5. washthe benzene solution is washed 3 times with water
  6. dry with materialAfter drying with sodium sulphate
  7. distillationthe benzene is distilled off

출처 및 근거

ORD 기록
ord-698a998925c24b02b567d3d935839993
출처 데이터셋
uspto-grants-1996_07
특허 번호
US05534644

반응 노트

불러오는 중…