홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Formamide → N-((2,4-Difluorophenyl)(tosyl)methyl)formamide

HRID 1743990
인쇄

반응식

HRID 1743990 반응식
[F:1][C:2]1[CH:9]=[C:8]([F:10])[CH:7]=[CH:6][C:3]=1[CH:4]=O.[CH:11]([NH2:13])=[O:12].Cl[Si](C)(C)C.[C:19]1([CH3:28])[CH:24]=[CH:23][C:22]([S:25]([OH:27])=[O:26])=[CH:21][CH:20]=1>O.CCCCCC.CC(OC)(C)C.C(#N)C.C1(C)C=CC=CC=1>[F:1][C:2]1[CH:9]=[C:8]([F:10])[CH:7]=[CH:6][C:3]=1[CH:4]([S:25]([C:22]1[CH:23]=[CH:24][C:19]([CH3:28])=[CH:20][CH:21]=1)(=[O:27])=[O:26])[NH:13][CH:11]=[O:12]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

10

반응물 4

HCID 713FormamideHCID 6397ChlorotrimethylsilaneHCID 10818p-Toluenesulfinic acidHCID 737702,4-Difluorobenzaldehyde

생성물 1

HCID 22236872N-((2,4-Difluorophenyl)(tosyl)methyl)formamide

시약·촉매·용매 5

HCID 962Water용매2회
HCID 1140
Toluene
용매
HCID 6342Acetonitrile용매
HCID 8058Hexane용매
HCID 15413tert-Butyl methyl ether용매

반응 조건

온도
50 °C

실험 절차

To 2,4-difluorobenzaldehyde (1.42 g, 10.0 mmol) is added toluene (5.0 mL), acetonitrile (5.0 mL), formamide (0.993 mL, 25.0 mmol) and chlorotrimethylsilane (1.40 mL, 11.0 mmol) in order. The cloudy mixture is heated to 50° C. and stirred at this temperature for 7 hours. p-Toluenesulfinic acid (2.19 g, 14.0 mmol) is added, and the mixture stirred at 50° C. for 6 hours, then for 3 hours at room temperature. MTBE (18.0 mL) and water (17.0 mL) are added, and the mixture stirred at room temperature for 15 minutes. The layers are separated, and the aqueous layer extracted with MTBE (5.0 mL). Most of the solvents are removed from the combined organic extracts leaving a white semi-solid. To the residual is added hexane (10.0 mL) and water (10.0 mL), and the resulting slurry stirred at room temperature for 30 minutes, then filtered. The cake is washed with hexane (2×) and dried in a vacuum-oven (30° C.) for 18 hours. The title compound may be obtained as a white powder (2.58 g, 79%).

후처리

  1. stirringthe mixture stirred at 50° C. for 6 hours
  2. waitfor 3 hours at room temperature
  3. stirringthe mixture stirred at room temperature for 15 minutes
  4. customThe layers are separated
  5. extractionthe aqueous layer extracted with MTBE (5.0 mL)
  6. customMost of the solvents are removed from the combined organic extracts
  7. customleaving a white semi-solid
  8. stirringthe resulting slurry stirred at room temperature for 30 minutes
  9. filtrationfiltered
  10. washThe cake is washed with hexane (2×)
  11. customdried in a vacuum-oven (30° C.) for 18 hours

출처 및 근거

ORD 기록
ord-940e23a02e854f58b114ccfb945c42d9
출처 데이터셋
uspto-grants-2006_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07012143B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트