홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dimethyl Sulfoxide → 4-Pentenoic acid

HRID 1760498
인쇄

반응식

HRID 1760498 반응식
[CH3:1][NH:2][S:3]([C:6]([F:18])([F:17])[C:7]([F:16])([F:15])[C:8]([F:14])([F:13])[C:9]([F:12])([F:11])[F:10])(=[O:5])=[O:4].CS(C)=O.[OH-:23].[K+].Br[CH2:26][CH2:27][CH2:28][CH2:29][CH2:30][CH2:31][CH2:32][CH2:33][CH2:34][CH:35]=[CH2:36]>O>[CH2:26]=[CH:27][CH2:28][CH2:29][C:30]([OH:4])=[O:23].[CH2:26]([N:2]([CH3:1])[S:3]([C:6]([F:17])([F:18])[C:7]([F:15])([F:16])[C:8]([F:13])([F:14])[C:9]([F:10])([F:12])[F:11])(=[O:5])=[O:4])[CH2:27][CH2:28][CH2:29][CH2:30][CH2:31][CH2:32][CH2:33][CH2:34][CH:35]=[CH2:36]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 679Dimethyl SulfoxideHCID 14797Potassium Hydroxide2회HCID 1099681,1,2,2,3,3,4,4,4-nonafluoro-N-methylbutane-1-sulfonamideHCID 28414811-Bromo-1-undecene

생성물 2

HCID 611384-Pentenoic acidHCID 22596927n-(10-Undecenyl)-n-methylperfluorobutanesulfonamide

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
80 °C

실험 절차

A 500 mL three-necked round-bottom flask equipped with magnetic stirring, oil bath heat, and connection to a nitrogen bubbler was charged with 17.2 g of N-methylperfluorobutanesulfonamide (C4F9SO2NHCH3) and 250 mL dimethyl sulfoxide. Stirring was begun, and the solid dissolved within a few minutes. A solution of 4.0 g of potassium hydroxide in 5 mL of water was added via pipette, and stirring was continued for another 30 min while the oil bath was heated to 80° C. By the end of this period most of the potassium hydroxide had dissolved. 11-Bromo-1-undecene, obtained from Aldrich Chemical Co. (95 percent purity, 12.3 g) was then added to the flask via pipette, and the reaction mixture was left to stir for 19 hr at 80° C. The oil bath was then removed to allow the mixture to cool, and the flask contents were poured into a separatory funnel. The mixture separated into two liquid phases, and the lower layer was drawn off. The upper phase was diluted with an equal volume of water, causing separation of a small amount of lower phase. This was also drawn off and combined with the first batch. The combined crude product (18.0 g) was dissolved in 150 ml dichloromethane and washed successively with 100 ml portions of water, 10 weight percent aqueous potassium hydroxide solution, water, and brine. The dichloromethane solution was dried over anhydrous magnesium sulfate and filtered, then solvent was removed on a rotary evaporator at water aspirator pressure. This left 17.9 g light straw-colored liquid product. Bulb-to-bulb vacuum distillation of 17.3 g crude product at 160-180° C. and 0.3 torr (4 Pa) gave 16.2 g of N-(10-undecenyl)-N-methylperfluorobutanesulfonamide as a clear, colorless liquid distillate.

후처리

  1. customA 500 mL three-necked round-bottom flask equipped with magnetic stirring, oil bath
  2. temperatureheat
  3. dissolutionthe solid dissolved within a few minutes
  4. stirringstirring
  5. addition(95 percent purity, 12.3 g) was then added to the flask via pipette
  6. waitthe reaction mixture was left
  7. stirringto stir for 19 hr at 80° C
  8. customThe oil bath was then removed
  9. temperatureto cool
  10. additionthe flask contents were poured into a separatory funnel
  11. customThe mixture separated into two liquid phases
  12. additionThe upper phase was diluted with an equal volume of water
  13. customseparation of a small amount of lower phase
  14. dissolutionwas dissolved in 150 ml dichloromethane
  15. washwashed successively with 100 ml portions of water, 10 weight percent aqueous potassium hydroxide solution, water, and brine
  16. dry with materialThe dichloromethane solution was dried over anhydrous magnesium sulfate
  17. filtrationfiltered
  18. customsolvent was removed on a rotary evaporator at water aspirator pressure
  19. distillationvacuum distillation of 17.3 g crude product at 160-180° C.

출처 및 근거

ORD 기록
ord-34eb4d233a7c47669c058b1a5b3fb503
출처 데이터셋
uspto-grants-2005_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06841079B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트