4-Chloro-6-methyl-1,3,5-triazin-2-amine → 4-(2-Fluoro-5-methoxypyridin-3-yl)-6-methyl-1,3,5-triazin-2-amine

HRID 1812353

반응식

HRID 1812353 반응식
Cl[C:2]1[N:7]=[C:6]([CH3:8])[N:5]=[C:4]([NH2:9])[N:3]=1.[F:10][C:11]1[C:16](B(O)O)=[CH:15][C:14]([O:20][CH3:21])=[CH:13][N:12]=1.C([O-])(=O)C.[K+]>CCO.O>[F:10][C:11]1[C:16]([C:2]2[N:7]=[C:6]([CH3:8])[N:5]=[C:4]([NH2:9])[N:3]=2)=[CH:15][C:14]([O:20][CH3:21])=[CH:13][N:12]=1

참가 물질

6

반응물 3

HCID 305914-Chloro-6-methyl-1,3,5-triazin-2-amineHCID 517044Potassium AcetateHCID 574973352-Fluoro-5-methoxypyridine-3-boronic acid

생성물 1

HCID 666111694-(2-Fluoro-5-methoxypyridin-3-yl)-6-methyl-1,3,5-triazin-2-amine

시약·촉매·용매 2

HCID 702Ethanol용매HCID 962Water용매

반응 조건

온도
100 °C

실험 절차

To a 20 mL microwave reaction tube was added 4-chloro-6-methyl-1,3,5-triazin-2-amine (Example 9, 1.02 g, 7.05 mmol), 2-fluoro-5-methoxypyridin-3-ylboronic acid (1.67 g, 9.77 mmol), Am-Phos (Aldrich, 0.255 g, 0.360 mmol) and potassium acetate (Aldrich, 2.11 g, 21.5 mmol) in EtOH (10 mL) and water (1 mL). The mixture was degassed by bubbling argon through for 5 min. The tube was heated in a microwave reactor (Biotage) at 100° C. for 20 min. The reaction mixture was partitioned between water (200 mL) and EtOAc (200 mL). Layers were separated and insoluble material was collected (precipitate 1). The aqueous phase was further extracted with 10% isopropanol in chloroform (3×100 mL). Each organic phase was dried over sodium sulfate, filtered and concentrated in vacuo. Upon addition of DCM to the crude product, precipitate came out and the solid was collected via filtration. The first precipitate (precipitate 1) and the solid from extraction were all desired product (1.17 g, 70.3%). 1H NMR (400 MHz,CDCl3) δ ppm 8.08 (dd, J=7.53, 3.23 Hz, 1H) 7.97 (dd, J=3.03, 1.86 Hz, 1H) 5.47 (br. s., 2H) 3.92 (s, 3H) 2.54 (s, 3H). m/z (ESI, positive ion): 236.0 (M+H)+.

후처리

  1. customThe mixture was degassed
  2. customby bubbling argon through for 5 min
  3. customThe reaction mixture was partitioned between water (200 mL) and EtOAc (200 mL)
  4. customLayers were separated
  5. custominsoluble material was collected (precipitate 1)
  6. extractionThe aqueous phase was further extracted with 10% isopropanol in chloroform (3×100 mL)
  7. dry with materialEach organic phase was dried over sodium sulfate
  8. filtrationfiltered
  9. concentrationconcentrated in vacuo
  10. additionUpon addition of DCM to the crude product, precipitate
  11. filtrationthe solid was collected via filtration
  12. extractionThe first precipitate (precipitate 1) and the solid from extraction

출처 및 근거

ORD 기록
ord-8e369a245b8f49bf99afa4f092c3e50f
출처 데이터셋
uspto-grants-2013_01
특허 번호
US08362241B2

연결된 노트

불러오는 중…