홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

4,4'-Bis(1,1-dimethylethyl)-1,1'-biphenyl → [(Z)-1,2-difluoro-2-(4-propylcyclohexyl)vinyl]triethylsilane

HRID 1841831
인쇄

반응식

HRID 1841831 반응식
C(C1C=CC(C2C=CC(C(C)(C)C)=CC=2)=CC=1)(C)(C)C.[Li].Cl[CH:23]1[CH2:28][CH2:27][CH:26]([CH2:29][CH2:30][CH3:31])[CH2:25][CH2:24]1.[CH2:32]([Si:34]([CH2:42][CH3:43])([CH2:40][CH3:41])[C:35]([F:39])=[C:36](F)[F:37])[CH3:33]>C1COCC1.O>[F:39]/[C:35](/[Si:34]([CH2:40][CH3:41])([CH2:42][CH3:43])[CH2:32][CH3:33])=[C:36](/[F:37])\[CH:23]1[CH2:28][CH2:27][CH:26]([CH2:29][CH2:30][CH3:31])[CH2:25][CH2:24]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 741954,4'-Bis(1,1-dimethylethyl)-1,1'-biphenylHCID 3028194LithiumHCID 109214661,2,2-Trifluoroethenyl-triethylsilaneHCID 199612711-Chloro-4-propylcyclohexane

생성물 1

HCID 71074322[(Z)-1,2-difluoro-2-(4-propylcyclohexyl)vinyl]triethylsilane

시약·촉매·용매 2

HCID 962
Water
용매
HCID 8028Tetrahydrofuran용매

반응 조건

온도
-78 °C

실험 절차

74.1 g (0.28 mol) of 4,4′-di-tert-butylbiphenyl are initially introduced in 1000 ml of THF in an argon atmosphere, and 1.6 g (0.23 mol) of lithium (granules) are added at 0° C. After 5 h, the blue solution is cooled to −78° C., and 40.6 g (0.25 mol) of 1-chloro-4-propylcyclohexane are added. After 30 min at this temperature, 49.6 g (0.25 mol) of triethyltrifluorovinylsilane are metered in. The mixture is warmed slowly and stirred at room temperature for 16 h. Water is added, and the batch is extracted with MTBE. The aqueous phase is extracted with MTBE, and the combined organic phases are washed with water and saturated sodium chloride solution. The solution is dried using sodium sulfate and concentrated under reduced pressure. The residue is digested with methanol, and insoluble material is filtered off. The filtrate is concentrated under reduced pressure, and the residue is purified by column chromatography (SiO2, pentane), giving [(Z)-1,2-difluoro-2-(4-propylcyclohexyl)vinyl]triethylsilane as a colourless oil.

후처리

  1. additionare added at 0° C
  2. temperatureThe mixture is warmed slowly
  3. extractionthe batch is extracted with MTBE
  4. extractionThe aqueous phase is extracted with MTBE
  5. washthe combined organic phases are washed with water and saturated sodium chloride solution
  6. customThe solution is dried
  7. concentrationconcentrated under reduced pressure
  8. filtrationis filtered off
  9. concentrationThe filtrate is concentrated under reduced pressure
  10. customthe residue is purified by column chromatography (SiO2, pentane)

출처 및 근거

ORD 기록
ord-4c7d1c466dbf4fc9915e6d8b45541f0d
출처 데이터셋
uspto-grants-2015_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08945420B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트