홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methyltrimethoxysilane → Methyltrimethoxysilane Isobutyltrimethoxysilane KOH

HRID 1852314
인쇄

반응식

HRID 1852314 반응식
[CH2:1]([Si:5]([O:10][CH3:11])([O:8][CH3:9])[O:6][CH3:7])[CH:2]([CH3:4])[CH3:3].C[Si](OC)(OC)[O:14]C.[OH-].[K+:21]>O>[CH3:1][Si:5]([O:10][CH3:11])([O:8][CH3:9])[O:6][CH3:7].[CH2:1]([Si:5]([O:10][CH3:11])([O:6][CH3:7])[O:8][CH3:9])[CH:2]([CH3:4])[CH3:3].[OH-:14].[K+:21]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 14456MethyltrimethoxysilaneHCID 14797Potassium HydroxideHCID 87622Isobutyltrimethoxysilane2회

생성물 1

HCID 86712056Methyltrimethoxysilane Isobutyltrimethoxysilane KOH

시약·촉매·용매 1

HCID 962Water용매3회

실험 절차

A 500 ml 5-neck round-bottom flask rendered inert with nitrogen and equipped with paddle stirrer, dropping funnel, thermometer, and water separator with reflux condenser is charged—in an oil bath at 40° C.—with 77.4 g (0.42 mol) of isobutyltrimethoxysilane (=2-methyl-1-propyltrimethoxysilane, available commercially from abcr GmbH & Co. KG), 25 g (0.18 mol) of methyltrimethoxysilane (available commercially from Wacker Chemie AG), and 78.3 g of Isopar (isoparaffinic hydrocarbon mixture with a boiling range of 113-143° C., available commercially from ExxonMobil). The water separator is filled to the brim with Isopar E. While stirring at 300 rpm, 67.5 g of 50% strength potassium hydroxide solution (0.6 mol KOH) are metered in over 10 minutes. During this addition, the reaction mixture warms up to 63° C. By subsequent heating it is brought to boiling temperature. The distillate separates out as the lower phase in the water separator. It is removed from time to time and replaced each time by Isopar E. Up to a boiling temperature of 118° C., 74 g of clear colorless distillate are collected, which according to analysis by gas chromatography contains 75:5% methanol, 23.6% water, and 0.6% Isopar E. Thus 97% of the methoxy radicals are hydrolyzed. During the distillation, a suspension is formed in the reaction mixture. The volatile constituents are removed by distillation at 70° C./4 hPa. The residue left is 96.5 g of a white, coarse powder whose solids content is 99.4% (determined using the HR73 Halogen Moisture Analyzer solids content balance from Mettler Toledo at 160° C.)

후처리

  1. customA 500 ml 5-neck round-bottom flask rendered inert with nitrogen
  2. customequipped with paddle stirrer
  3. temperaturewith reflux condenser
  4. customis charged—in an oil bath at 40° C.
  5. customare metered in over 10 minutes
  6. additionDuring this addition
  7. customwarms up to 63° C
  8. temperatureBy subsequent heating it
  9. customIt is removed from time to time
  10. distillationUp to a boiling temperature of 118° C., 74 g of clear colorless distillate are collected
  11. distillationDuring the distillation
  12. customa suspension is formed in the reaction mixture
  13. customThe volatile constituents are removed by distillation at 70° C./4 hPa
  14. waitThe residue left
  15. customat 160° C.

출처 및 근거

ORD 기록
ord-03138e59e12743ebb41a204008bc3b33
출처 데이터셋
uspto-grants-2015_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08961672B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트