홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Hydrochloric Acid → 2-Cyclopropyl-6-methylphenyl acetate

HRID 1866824
노트
인쇄 미리보기

반응식

HRID 1866824 반응식
[Mg].C1COCC1.[C:7]([O:10][C:11]1[C:16]([CH3:17])=[CH:15][CH:14]=[CH:13][C:12]=1[CH:18](Br)[CH2:19][CH2:20]Br)(=[O:9])[CH3:8].Cl>O.II>[C:7]([O:10][C:11]1[C:16]([CH3:17])=[CH:15][CH:14]=[CH:13][C:12]=1[CH:18]1[CH2:20][CH2:19]1)(=[O:9])[CH3:8]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 313Hydrochloric AcidHCID 8028Tetrahydrofuran2회HCID 5462224MagnesiumHCID 119598052-(1,3-Dibromopropyl)-6-methylphenyl acetate

생성물 1

HCID 119598072-Cyclopropyl-6-methylphenyl acetate수율 113.5%

시약·촉매·용매 2

HCID 807Iodine촉매
HCID 962Water용매

실험 절차

A 500 ml four-necked round-bottomed flask was equipped with a magnetic stirrer bar, a thermometer, a reflux condenser and a drying tube. Magnesium (2.50 g, 102.8 mmol) and anhydrous THF (30 ml) were added thereto under a nitrogen atmosphere. Iodine (63 mg) was added to the mixture and the mixture was stirred at room temperature for 30 minutes. Subsequently, 2-(1,3-dibromopropyl)-6-methylphenyl acetate (30.0 g, 85.7 mmol) and anhydrous THF (90 ml) were added to the mixture at 80° C. over 15 minutes. After the mixture was stirred at 80° C. for 30 minutes, the mixture was further stirred at room temperature for 1.5 hours. 1M Hydrochloric acid (100 ml) was added dropwise to the reaction mixture such that the temperature of the reaction mixture did not exceed 40° C. The mixture was diluted with water (100 ml) and extracted with a 10% ethyl acetate-90% hexane (V/V) solvent mixture (3×200 ml). The organic layer was combined and it was successively washed with water (2×200 ml) and a saturated aqueous NaCl solution (50 ml), followed by drying with anhydrous sodium sulfate (100 g). After the solid was removed by filtration, the filtrate was concentrated to obtain 18.5 g of 2-cyclopropyl-6-methylphenyl acetate as a brown gum.

후처리

  1. customA 500 ml four-necked round-bottomed flask was equipped with a magnetic stirrer bar
  2. stirringAfter the mixture was stirred at 80° C. for 30 minutes
  3. stirringthe mixture was further stirred at room temperature for 1.5 hours
  4. customdid not exceed 40° C
  5. extractionextracted with a 10% ethyl acetate-90% hexane (V/V) solvent mixture (3×200 ml)
  6. washit was successively washed with water (2×200 ml)
  7. dry with materialby drying with anhydrous sodium sulfate (100 g)
  8. customAfter the solid was removed by filtration
  9. concentrationthe filtrate was concentrated

출처 및 근거

ORD 기록
ord-2af1d2972b0447f9a79e8d1c12e8cb7a
출처 데이터셋
uspto-grants-2009_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07629494B2

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트