[CH:1]1[CH:6]=[C:5]([C:7]([F:10])([F:9])[F:8])[C:4]([NH2:11])=[CH:3][CH:2]=1.Br[N:13]1[C:17](=[O:18])[C:16]([CH3:20])([CH3:19])[N:15](Br)[C:14]1=[O:22].CC1(C)NC(=O)NC1=O>[Cu]=O.CC(N(C)C)=O>[NH2:11][C:4]1[CH:3]=[CH:2][C:1]([N:13]2[C:17](=[O:18])[C:16]([CH3:20])([CH3:19])[NH:15][C:14]2=[O:22])=[CH:6][C:5]=1[C:7]([F:9])([F:10])[F:8]100 g of O-trifluoromethylaniline is introduced at 20°±2° C. then 100 ml of dimethylacetamide is added while maintaining the same temperature. After cooling down under agitation at 0° C.±2° C. a solution of 88.8 g of dibromodimethylhydantoin and 100 ml of dimethylacetamide is then added over about 30 minutes while maintaining the temperature at 0° C.±2° C. The reaction medium is maintained under agitation for 30 minutes, then taken to 20° C.±2° C. and 40 g of dimethylhydantoin then 50 g copper oxide are added. The whole is heated under reflux for approximately 18 hours then cooled down to 20° C.±2° C., agitation is carried out for 30 minutes followed by filtering, separating and washing with 4×25 ml of dimethylacetamide. The resultant product is then poured into 300 ml of pure 22°Be ammonium hydroxide and 300 ml of demineralized water under agitation over 1 hour at 20° C.±2° C., agitation is continued for 1 hour at 20° C.±2° C. then the whole is cooled down to 0° C.±5° C. and is maintained under agitation for another hour, followed by separating, washing at 20° C.±2° C., with 100 ml of pure 22°Be ammonium hydroxide then with 4×100 ml of demineralized water and drying. In this way 155.8 g of expected product is obtained.
불러오는 중…
