홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

4-Hydroxybenzoic Acid → Acetic acid, yttrium(3+) salt (3:1)

HRID 1905862
인쇄

반응식

HRID 1905862 반응식
O.[Y:2].OC1C=C[C:7]([C:8]([OH:10])=[O:9])=CC=1>C(O)CC.CCCO.CCCO.CCCO.CCCO.[Zr]>[C:8]([O-:10])(=[O:9])[CH3:7].[Y+3:2].[C:8]([O-:10])(=[O:9])[CH3:7].[C:8]([O-:10])(=[O:9])[CH3:7]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 1354-Hydroxybenzoic AcidHCID 962Water2회HCID 23993Yttrium2회

생성물 1

HCID 168102Acetic acid, yttrium(3+) salt (3:1)

시약·촉매·용매 2

HCID 3539967Zirconium n-propoxide촉매HCID 10311-Propanol용매2회

실험 절차

A preferred method for the production of the admixture needed to produce an 8 wt % Y2O3 /ZrO2 spray dried material is described herein. A clear solution of yttrium acetate was prepared by dissolving 247 g of the Y(acetate)3. 3.5 H2O (0.76 mole) in 500 cc (28 mole) of 90° C. distilled water. This solution was added to an equal volume of hot (80° C.) n-propanol. This solution must be kept hot during the synthesis. Using a heated dropping funnel, the yttrium solution was slowly added to 2.66 kg (6.3 mole) of zirconium n-propoxide. An air driven propellor stirrer was used throughout the addition, and the stirring continued for an extra 30 min. The suspension was quite thick and was improved by the addition of one gram of p-hydroxybenzoic acid (0.2 wt % of the ZrO2) in 1.3 l of n-propanol to the zirconium alkoxide prior to the addition of the yttrium solution.

후처리

  1. customThis solution must be kept hot during the synthesis
  2. additionwas used throughout the addition

출처 및 근거

ORD 기록
ord-e5619214c5f14b10a66e2891be097b5a
출처 데이터셋
uspto-grants-1987_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04649037

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트