홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ammonia → 6,7-Dimethoxy-1,2,3,4-tetrahydronaphthalen-1-amine hydrochloride

HRID 1910598
인쇄

반응식

HRID 1910598 반응식
[CH3:1][O:2][C:3]1[CH:4]=[C:5]2[C:10](=[CH:11][C:12]=1[O:13][CH3:14])[C:9](=O)[CH2:8][CH2:7][CH2:6]2.[NH3:16].C(O)C.[BH4-].[Na+]>CC(C)[O-].[Ti+4].CC(C)[O-].CC(C)[O-].CC(C)[O-]>[CH3:1][O:2][C:3]1[CH:4]=[C:5]2[C:10](=[CH:11][C:12]=1[O:13][CH3:14])[CH:9]([NH2:16])[CH2:8][CH2:7][CH2:6]2
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 222AmmoniaHCID 702EthanolHCID 2668163,4-Dihydro-6,7-dimethoxy-1(2H)-naphthalenoneHCID 4311764Sodium borohydride

생성물 1

HCID 4290936,7-Dimethoxy-1,2,3,4-tetrahydronaphthalen-1-amine hydrochloride수율 4%

시약·촉매·용매 1

HCID 11026
Titanium isopropoxide
촉매

반응 조건

온도
0 °C

실험 절차

3,4-Dihydro-6,7-dimethoxynaphthalen-1(2H)-one (5.00 g, 24.2 mmol), titanium(IV) isopropoxide (14.1 mL, 48.5 mmol) and 2 M solution of ammonia in ethanol (60.6 mL, 121 mmol) were stirred at room temperature for 6 h. The reaction was cooled to 0° C. and sodium borohydride was added portionwise during 10 min (1.37 g, 36.4 mmol); the resultant mixture was stirred at rt for an additional 3 h. The reaction was quenched by pouring it into ammonium hydroxide (2 M, 130 mL), the precipitate that formed was filtered off and washed with ethyl acetate (25 mL×3). The organic layer was separated and the remaining aqueous layer was extracted with ethyl acetate (25 mL×2). The combined organic extracts were washed with 1 M HCl (50 mL). The acidic aqueous extracts were washed with ethyl acetate (100 mL), then treated with aqueous sodium hydroxide (2 M) to pH 10-12, and extracted with ethyl acetate (75 mL×3). The combined organic extracts were washed with brine (75 mL), dried (Na2SO4), and concentrated in vacuo to afford the desired product (200 mg, 4% yield). 1H NMR (400 MHz, CDCl3): δ 6.95 (s, 1H), 6.56 (s, 1H), 3.92 (m, 1H), 3.88 (s, 3H), 3.85 (s, 3H), 2.71 (m, 2H), 1.97 (m, 2H), 1.76 (m, 2H).

후처리

  1. customThe reaction was quenched
  2. additionby pouring it into ammonium hydroxide (2 M, 130 mL)
  3. customthe precipitate that formed
  4. filtrationwas filtered off
  5. washwashed with ethyl acetate (25 mL×3)
  6. customThe organic layer was separated
  7. extractionthe remaining aqueous layer was extracted with ethyl acetate (25 mL×2)
  8. washThe combined organic extracts were washed with 1 M HCl (50 mL)
  9. washThe acidic aqueous extracts were washed with ethyl acetate (100 mL)
  10. additiontreated with aqueous sodium hydroxide (2 M) to pH 10-12
  11. extractionextracted with ethyl acetate (75 mL×3)
  12. washThe combined organic extracts were washed with brine (75 mL)
  13. dry with materialdried (Na2SO4)
  14. concentrationconcentrated in vacuo

출처 및 근거

ORD 기록
ord-a1554acc1be544f9b7deddd378d9c328
출처 데이터셋
uspto-grants-2013_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08604021B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트