홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethanol → Montelukast

HRID 1931355
인쇄

반응식

HRID 1931355 반응식
[OH-:1].[Na+].[Cl:3][C:4]1[CH:13]=[C:12]2[C:7]([CH:8]=[CH:9][C:10](/[CH:14]=[CH:15]/[C:16]3[CH:17]=[C:18]([C@H:22]([S:35][CH2:36][C:37]4(CC#N)[CH2:39][CH2:38]4)[CH2:23][CH2:24][C:25]4[CH:30]=[CH:29][CH:28]=[CH:27][C:26]=4[C:31]([OH:34])([CH3:33])[CH3:32])[CH:19]=[CH:20][CH:21]=3)=[N:11]2)=[CH:6][CH:5]=1.[CH2:43]([OH:45])[CH3:44]>>[CH3:32][C:31]([OH:34])([C:26]1[CH:27]=[CH:28][CH:29]=[CH:30][C:25]=1[CH2:24][CH2:23][C@@H:22]([S:35][CH2:36][C:37]1([CH2:44][C:43]([OH:1])=[O:45])[CH2:39][CH2:38]1)[C:18]1[CH:19]=[CH:20][CH:21]=[C:16](/[CH:15]=[CH:14]/[C:10]2[CH:9]=[CH:8][C:7]3[CH:6]=[CH:5][C:4]([Cl:3])=[CH:13][C:12]=3[N:11]=2)[CH:17]=1)[CH3:33]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 3

HCID 702EthanolHCID 14798Sodium HydroxideHCID 16123405Montelukast nitrile

생성물 1

HCID 5281040Montelukast

반응 조건

온도
60 °C

실험 절차

143.6 g of sodium hydroxide were added to a solution of 102 g of (R,E)-2-(1-((1-(3-(2-(7-chloroquinolin-2-yl)vinyl)phenyl)-3-(2-(2-hydroxypropan-2-yl)phenyl)propylthio)methyl)cyclopropyl)acetonitrile in 407 ml of ethanol 96% (v/v). The mixture was stirred at reflux temperature for 30 hours. After this period of time, the solvent was distilled off under vacuum (Purity by HPLC: 61.5 area %; impurity i2: 1.84 area %; impurity i5: 3.70 area %; impurity i6: 1.42 area %). The mixture was partitioned with 1000 ml of toluene and 1500 ml of water at room temperature. The aqueous phase with the inorganic salts dissolved, was discarded. The organic phase was mixed with 1500 ml of water and the mixture was heated to 60° C. and stirred for 15 minutes. At this point the product was dissolved in the aqueous layer. The pH of the aqueous layer was 12.5. Some impurities from the process were dissolved in the organic layer. Therefore, the organic layer was discarded. The toluene wash at 60° C. was repeated. The outcome aqueous layer was cooled down to room temperature and 1000 ml of toluene were added. Then, the pH of the mixture was adjusted to 5.6 with a 2M solution of acetic acid. The mixture was stirred for 30 minutes and the aqueous layer was discarded. Finally, the organic layer was washed with 1000 ml of water and kept as a solution of purified Montelukast acid (Purity by HPLC: 84.4 area %; impurity i2: 0.81 area %; impurity i5: 0.70 area %; impurity i6: 0.007 area %). Yield corrected by HPLC of the title compound from the outcome solution: 86%.

후처리

  1. temperatureat reflux temperature for 30 hours
  2. waitAfter this period of time
  3. distillationthe solvent was distilled off under vacuum (Purity by HPLC: 61.5 area %; impurity i2: 1.84 area %; impurity i5: 3.70 area %; impurity i6: 1.42 area %)
  4. customThe mixture was partitioned with 1000 ml of toluene and 1500 ml of water at room temperature
  5. dissolutionThe aqueous phase with the inorganic salts dissolved
  6. additionThe organic phase was mixed with 1500 ml of water
  7. stirringstirred for 15 minutes
  8. dissolutionAt this point the product was dissolved in the aqueous layer
  9. dissolutionSome impurities from the process were dissolved in the organic layer
  10. washThe toluene wash at 60° C.
  11. temperatureThe outcome aqueous layer was cooled down to room temperature
  12. addition1000 ml of toluene were added
  13. stirringThe mixture was stirred for 30 minutes
  14. washFinally, the organic layer was washed with 1000 ml of water
  15. customYield

출처 및 근거

ORD 기록
ord-cbcb087ac04d43059caa11fe4ddfb76d
출처 데이터셋
uspto-grants-2012_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08188285B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트