[C:1]1([C:11]2[CH:16]=[CH:15][CH:14]=[CH:13][CH:12]=2)[CH:6]=[CH:5][C:4]([CH2:7][C:8]([OH:10])=O)=[CH:3][CH:2]=1.[CH2:17](OCC)C.CO.Cl>S(Cl)(Cl)=O.[Li].[Cu]>[C:1]1([C:11]2[CH:16]=[CH:15][CH:14]=[CH:13][CH:12]=2)[CH:2]=[CH:3][C:4]([CH2:7][C:8](=[O:10])[CH3:17])=[CH:5][CH:6]=110.5 g of 4-biphenylylacetic acid was dissolved in 50 ml of thionyl chloride, and the solution was heated at 80° C. for 3 hours. Then, excess thionyl chloride was distilled off under reduced pressure. Benzene was added to the residue, and the solvent was again distilled off. This operation was repeated again. Then, the formed acid chloride was dissolved in 100 ml of ethyl ether. Separately, 23.7 g of cuprous iodide was suspended in 50 ml of ethyl ether, and 166 ml of a 1.5M methyllithiumethyl ether solution was added thereto with stirring under cooling with ice to obtain a uniform solution. This solution was dropwise added to the ethyl ether solution of the acid chloride obtained by the above reaction under a nitrogen atmosphere while stirring and cooling to -70° C. After completion of the dropwise addition, the mixture was stirred at the same temperature for further one hour. Then, methanol was added thereto to decompose the excess copper lithium reagent. Ethyl ether and 2N hydrochloric acid were added to the reaction solution. After removing the formed insoluble matters by filtration, the filtrate was subjected to liquid separation. The organic layer was washed with a saturated sodium chloride aqueous solution and then dried over anhydrous magnesium sulfate. The drying agent was separated by filtration, and then the solvent was distilled off under reduced pressure to obtain 9.93 g (yield: 96%) of the above-identified compound as colorless oily substance.
불러오는 중…
