홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Indene → Tributylstannyldimethylphosphinoindene

HRID 1977436
인쇄

반응식

HRID 1977436 반응식
[CH2:1]1[C:9]2[C:4](=[CH:5][CH:6]=[CH:7][CH:8]=2)[CH:3]=[CH:2]1.C([Li])CCC.CCCCCC.Cl[P:22]([CH3:24])[CH3:23].Cl[Sn:26]([CH2:35][CH2:36][CH2:37][CH3:38])([CH2:31][CH2:32][CH2:33][CH3:34])[CH2:27][CH2:28][CH2:29][CH3:30]>CCOCC>[CH2:35]([Sn:26]([C:2]1[CH:3]([P:22]([CH3:24])[CH3:23])[C:4]2[C:9]([CH:1]=1)=[CH:8][CH:7]=[CH:6][CH:5]=2)([CH2:27][CH2:28][CH2:29][CH3:30])[CH2:31][CH2:32][CH2:33][CH3:34])[CH2:36][CH2:37][CH3:38]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 5

HCID 7219IndeneHCID 8058Hexane2회HCID 15096Tributyltin ChlorideHCID 69936ChlorodimethylphosphineHCID 178418339Butyllithium2회

생성물 1

HCID 70150774Tributylstannyldimethylphosphinoindene수율 79.6%

시약·촉매·용매

1
HCID 3283Diethyl Ether용매2회

반응 조건

온도
-20 °C

실험 절차

150 ml of ether were introduced into a round-bottomed flask which contained 5.5 g (0.047 mol) of indene; the mixture was cooled to −20° C. 20.8 ml of a 2.3 molar solution of butyl-lithium in hexane (0.048 mol) were added to this solution in the course of 5 minutes, a yellow solution being formed. After removal of the cooling bath, the solution was warmed to room temperature and subsequently stirred for 1 hour. After the reaction mixture had been cooled to −30° C., 4.6 g of chlorodimethylphosphine (0.048 mol) in 30 ml of ether were added in the course of 20 minutes, a precipitate forming. After stirring at −20° C. for 2 hours, 20.8 ml of a 2.3 molar solution of butyl-lithium in hexane (0.048 mol) were added drop-wise. When the addition was complete, the cooling bath was removed and the solution was warmed slowly to room temperature and subsequently stirred for 1.5 hours. After the suspension had been cooled to 0° C., 15.6 g of chlorotributyltin (0.048 mol) were added dropwise. The suspension formed was warmed to room temperature and stirred for 1.5 hours. The ether was removed in vacuo and the crude product was dissolved again in hexane, the solution was filtered and the filtrate was dried in vacuo, 17.4 g of the compound 3 (yield: 78%) remaining as a heavy yellow oil. 1H NMR (400 MHz, CD2Cl2) δ 7.67 (d, J=7.5 Hz, 1 H), 7.47 (d, J=7.4 Hz, 1 H), 7.18 (m, 2 H), 6.83 (m, 1 H), 4.28 (s with Sn satellites, 1 H), 1.43-0.78 (m, 33 H). 31P NMR (161.9 MHz, CD2Cl2): δ-61.6 ppm.

후처리

  1. customa yellow solution being formed
  2. customAfter removal of the cooling bath
  3. temperaturethe solution was warmed to room temperature
  4. temperatureAfter the reaction mixture had been cooled to −30° C.
  5. customa precipitate forming
  6. stirringAfter stirring at −20° C. for 2 hours
  7. additionWhen the addition
  8. customthe cooling bath was removed
  9. temperaturethe solution was warmed slowly to room temperature
  10. stirringsubsequently stirred for 1.5 hours
  11. temperatureAfter the suspension had been cooled to 0° C.
  12. customThe suspension formed
  13. temperaturewas warmed to room temperature
  14. stirringstirred for 1.5 hours
  15. customThe ether was removed in vacuo
  16. dissolutionthe crude product was dissolved again in hexane
  17. filtrationthe solution was filtered

출처 및 근거

ORD 기록
ord-25df81eb137a444e8135e05a2151f562
출처 데이터셋
uspto-grants-2001_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06232413B1

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트