홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Hydrochloric Acid → 6-Chloro-3-iodo-2-(trifluoromethyl)pyridine

HRID 19802
노트
인쇄 미리보기

반응식

HRID 19802 반응식
[Li]CCCC.C(NC(C)C)(C)C.[Cl:13][C:14]1[CH:19]=[CH:18][CH:17]=[C:16]([C:20]([F:23])([F:22])[F:21])[N:15]=1.[I:24]I.Cl>C1COCC1>[Cl:13][C:14]1[N:15]=[C:16]([C:20]([F:21])([F:22])[F:23])[C:17]([I:24])=[CH:18][CH:19]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 5

HCID 313Hydrochloric AcidHCID 807IodineHCID 7912DiisopropylamineHCID 6023342-Chloro-6-(trifluoromethyl)pyridineHCID 178418339Butyllithium

생성물 1

HCID 153659566-Chloro-3-iodo-2-(trifluoromethyl)pyridine

시약·촉매·용매 1

HCID 8028
Tetrahydrofuran
용매
4회

반응 조건

온도
-75 °C

실험 절차

To a stirred solution of 7.1 ml of n-BuLi (1.6M in hexane, 11.3 mmol) in 7 ml THF under argon at −73° C. were added 1.6 ml of diisopropylamine (11.3 mmol) in 3 ml THF within 8 min. After 10 min stirring at the same temperature a solution of 1 g of 2-chloro-6-(trifluoromethyl)-pyridine (5.51 mmol) in 5 ml THF was added within 15 min (temperature between −76 and −75° C.). The dark brown solution was stirred at −75° C. for 1 h 15 min. Finally a solution of 1.4 g of iodine (5.51 mmol) in 10 ml THF was added at −75° C. over 25 min. After additional 45 min stirring at the same temperature 12 ml 2M aqueous HCl were added within 2 min (temperature raised from −78 to −50° C. The cooling device was then removed, the reaction mixture diluted with diethylether. After separation of the organic phase, the aqueous phase was reextracted with diethylether. The combined organic phases were successively washed with 10 ml 1M sodium thiosulfate, saturated NaHCO3 and brine, dried over magnesium sulfate, filtered off and concentrated in vacuo to yield 1.54 (69%) of 6-chloro-3-iodo-2-trifluoromethyl-pyridine as a brown semisolid residue. MS: 307.0

후처리

  1. additionwas added within 15 min (temperature between −76 and −75° C.)
  2. additionwere added within 2 min (temperature
  3. temperatureraised from −78 to −50° C
  4. customThe cooling device was then removed
  5. additionthe reaction mixture diluted with diethylether
  6. customAfter separation of the organic phase
  7. washThe combined organic phases were successively washed with 10 ml 1M sodium thiosulfate, saturated NaHCO3 and brine
  8. dry with materialdried over magnesium sulfate
  9. filtrationfiltered off
  10. concentrationconcentrated in vacuo

출처 및 근거

ORD 기록
ord-851d68431b5f4c3c93d8b533c82df6a5
출처 데이터셋
uspto-grants-2010_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07745477B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트