홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Ethyl Acetate → 6-Ethyl-2,3-dihydroquinolin-4(1H)-one

HRID 1985086
노트
인쇄 미리보기

반응식

HRID 1985086 반응식
O=P12OP3(OP(OP(O3)(O1)=O)(=O)O2)=O.[CH2:15]([C:17]1[CH:22]=[CH:21][C:20]([NH:23][CH2:24][CH2:25][C:26]([O:28]CC)=O)=[CH:19][CH:18]=1)[CH3:16].[OH-].[Na+].C(OCC)(=O)C>CS(O)(=O)=O.CO>[CH2:15]([C:17]1[CH:18]=[C:19]2[C:20](=[CH:21][CH:22]=1)[NH:23][CH2:24][CH2:25][C:26]2=[O:28])[CH3:16]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 8857Ethyl Acetate2회HCID 14798Sodium Hydroxide2회HCID 14812Phosphorus oxide (P4O10)2회HCID 43365416HCID 43365416, 화합물

생성물 1

HCID 223244436-Ethyl-2,3-dihydroquinolin-4(1H)-one수율 24.8%

시약·촉매·용매 2

HCID 887
Methanol
용매
HCID 6395Methanesulfonic Acid용매

반응 조건

온도
130 °C

실험 절차

A solution of phosphorus pentoxide (19.53 g) in methane sulfonic acid (200 mL) was heated to 130° C. The mixture was stirred at 130° C. for one hour until all the phosphorus pentoxide had dissolved. The mixuture was allowed to cool for 15 minutes and ethyl N-(4-ethylphenyl)-beta-alaninate (19.53 g of mono and di-ester mixture) was added. The mixture was heated to 130° C. for one hour and allowed to slowly cool overnight. The mixture was then cooled in an ice bath and 10N sodium hydroxide was added until the pH reached 9.5. Ethyl acetate was added to the mixture to help dissolve solids. The remaining gummy dark solids were dissolved in methanol and added to the ethyl acetate-aq. sodium hydroxide mixture. Semi-crystalline solids precipitated and were removed by filtration through Celite. The filtrate was washed with water, followed by 1N sodium hydroxide and brine, dried with magnesium sulfate, filtered, and concentrated. Silica gel chromatography using 0.25% ammonium hydroxide in dichloromethane gave mixed fractions. The mixed fractions were combined and re-chromatographed using 30% ethyl acetate in heptane. The resulting material was further upgraded by formation of the hydrochloride salt using 2N HCl in ether. The salt was collected by filtration and washed with heptane and dried in an oven under vacuum at 50° C. overnight. The salt was then partitioned between dichloromethane and 1N sodium hydroxide. The organic layer was extracted twice with dichloromethane, washed with 1N sodium hydroxide, dried with sodium sulfate, filtered, and concentrated to give 3.83 g of the title compound. MS (ESI+) for C11H13NO m/z 175.96 (M+H)+.

후처리

  1. dissolutionhad dissolved
  2. temperatureto cool for 15 minutes
  3. temperatureThe mixture was then cooled in an ice bath
  4. dissolutionto help dissolve solids
  5. customSemi-crystalline solids precipitated
  6. customwere removed by filtration through Celite
  7. washThe filtrate was washed with water
  8. dry with materialdried with magnesium sulfate
  9. filtrationfiltered
  10. concentrationconcentrated
  11. customgave
  12. additionmixed fractions
  13. customre-chromatographed
  14. filtrationThe salt was collected by filtration
  15. washwashed with heptane
  16. customdried in an oven under vacuum at 50° C. overnight
  17. customThe salt was then partitioned between dichloromethane and 1N sodium hydroxide
  18. extractionThe organic layer was extracted twice with dichloromethane
  19. washwashed with 1N sodium hydroxide
  20. dry with materialdried with sodium sulfate
  21. filtrationfiltered
  22. concentrationconcentrated

출처 및 근거

ORD 기록
ord-b78fb1ba1ed14cc19c28b9a587f623a6
출처 데이터셋
uspto-grants-2009_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07544717B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트