홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Diethyl methylmalonate → 3-(2,5-Dibromophenyl)-2-methylpropanoic acid

HRID 1987452
인쇄

반응식

HRID 1987452 반응식
[Na].C(O[C:5](=O)[CH:6]([CH3:12])[C:7]([O:9]CC)=[O:8])C.[Br:14][C:15]1[CH:16]=[C:17]([C:20]([Br:23])=[CH:21][CH:22]=1)CBr.[OH-].[K+]>C(O)C.O>[Br:14][C:15]1[CH:16]=[CH:17][C:20]([Br:23])=[CH:21][C:22]=1[CH2:5][CH:6]([CH3:12])[C:7]([OH:9])=[O:8]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 11857Diethyl methylmalonateHCID 14797Potassium HydroxideHCID 53260381,4-Dibromo-2-(bromomethyl)benzeneHCID 5360545Sodium

생성물 1

HCID 674252293-(2,5-Dibromophenyl)-2-methylpropanoic acid

시약·촉매·용매 2

HCID 702Ethanol용매2회
HCID 962
Water
용매

실험 절차

In a 1000 ml three-necked round-bottom flask equipped with a reflux condenser, dropping funnel with pressure-equalizing, and magnetic stirring bar, 6.10 g (0.27 mol) of sodium metal was dissolved in 150 ml of dry ethanol. To the resulting solution, 45.5 g (0.26 mol) of diethylmethylmalonate in 50 ml of dry ethanol was added dropwise within 10 minutes. This mixture was stirred for 15 minutes; then 84.3 g (0.26 mol) of 3,6-dibromobenzylbromide was added, while vigorously stirring, at a rate that allowed the reaction mixture to maintain a gentle reflux. Additionally, this mixture was refluxed for 4 hours, and then cooled to room temperature. A solution of 52.1 g of KOH in 140 ml of water was added. This mixture was refluxed for 3 hours to saponificate the ester formed. Ethanol and water were distilled off. To the residue, 200 ml of water, and then, 12 M HCl (to pH 1) were added. The substituted methylmalonic acid precipitated and was separated, washed with 3×100 ml of cold water, and dried overnight on watch glass. Crude 3-(2,5-dibromophenyl)-2-methylpropanoic acid was obtained after decarboxylation of this substituted methylmalonic acid by heating it in a round bottom flask for 2 hours at 160° C. Crude 3-(2,5-dibromophenyl)-2-methylpropanoic acid was used without further purification. A mixture of this acid, 70 ml of SOCl2, and 100 ml of CH2Cl2 was stirred for 3 hours at reflux. Thionyl chloride and CH2Cl2 were distilled off. The residue was dried in vacuum, and then dissolved in 95 ml of CH2Cl2. To a suspension of 47.0 g (0.35 mol) of AlCl3 in 470 ml of CH2Cl2, the above-obtained solution of 3-(2,5-dibromophenyl)-2-methylpropionyl chloride was added dropwise, while vigorously stirring, for 1 hour at −20° C. This mixture was refluxed for 3 hours, cooled to ambient temperature, and then poured on 500 cm3 of ice. The organic layer was separated. The aqueous layer was extracted with 3×200 ml of methyl-tert-butyl ether. The combined organic fractions were dried over K2CO3 and evaporated to dryness. The crude 4,7-dibromo-2-methyl-1-indanone was purified by flash chromatography on Silica Gel 60 (40-63 μm, d 50 mm, h 250 mm; eluent: hexanes/methyl-tert-butyl ether (1:1, vol.)). Yield 54.1 g (70%).

후처리

  1. customIn a 1000 ml three-necked round-bottom flask equipped with a reflux condenser
  2. stirringwhile vigorously stirring, at a rate that
  3. temperatureto maintain a gentle reflux
  4. temperatureAdditionally, this mixture was refluxed for 4 hours
  5. temperatureThis mixture was refluxed for 3 hours
  6. customformed
  7. distillationEthanol and water were distilled off
  8. additionTo the residue, 200 ml of water, and then, 12 M HCl (to pH 1) were added
  9. customThe substituted methylmalonic acid precipitated
  10. customwas separated
  11. washwashed with 3×100 ml of cold water
  12. customdried overnight on watch glass

출처 및 근거

ORD 기록
ord-c3a4fbc4d1334017bee740c30244c812
출처 데이터셋
uspto-grants-2009_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07550544B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트