홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Nitrogen → 2-Propenamide, 2-methyl-N-(4-(phenylamino)phenyl)-

HRID 2059347
인쇄

반응식

HRID 2059347 반응식
C[O-].[Na+].N#N.[CH:6]1[CH:11]=[CH:10][C:9]([NH:12][C:13]2[CH:18]=[CH:17][C:16]([NH2:19])=[CH:15][CH:14]=2)=[CH:8][CH:7]=1.C[O:21][C:22](=O)[C:23]([CH3:25])=[CH2:24]>CO>[NH:12]([C:13]1[CH:18]=[CH:17][C:16]([NH:19][C:22](=[O:21])[C:23]([CH3:25])=[CH2:24])=[CH:15][CH:14]=1)[C:9]1[CH:8]=[CH:7][CH:6]=[CH:11][CH:10]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 947NitrogenHCID 6658Methyl MethacrylateHCID 7564N-Phenyl-p-phenylenediamineHCID 10942334Sodium Methoxide

생성물 1

HCID 1624682-Propenamide, 2-methyl-N-(4-(phenylamino)phenyl)-수율 80.15%

시약·촉매·용매 1

HCID 887Methanol용매

반응 조건

온도
70 °C

실험 절차

A one liter flask equipped with an agitator was charged with 90 grams of methanol and 30 grams (0.55 mol) of sodium methoxide while under a slow N2 purge. The mixture was stirred until solution was achieved. 450 milliliters of xylene followed by 92 grams (0.5 mol) of p-aminodiphenylamine and 70.8 (0.71 mol) of methylmethacrylate were added to the flask while agitating. The homogeneous solution was then slowly heated and methanol was removed through a packed column. Methanol forms an azeotrope with methylmethacrylate and thus the distillate contained some methylmethacrylate as well as some xylene. Approximately 120 grams of distillate was removed over a period of two hours, during which the column outlet temperature stayed at 62°-63° C. while the flask temperature rose from 90° C. to 138° C. The column outlet temperature then started climbing, indicating the absence of methanol. The flask was then cooled to 70° C. and the sodium salt was filtered through a Buchner funnel. The salt was first washed with xylene to remove the residual amine and then with hexane. The salt was allowed to air dry and then restirred in one liter of cold water. It was then hydrolyzed with 10 percent sulfuric acid to pH of about 6. The product was filtered and air dried yielding 101 grams of N-(4-anilinophenyl) methacrylamide having a melting point of 102°-103° C. The yield was 80.15 percent.

후처리

  1. customA one liter flask equipped with an agitator
  2. custompurge
  3. additionwere added to the flask
  4. stirringwhile agitating
  5. temperatureThe homogeneous solution was then slowly heated
  6. custommethanol was removed through a packed column
  7. customApproximately 120 grams of distillate was removed over a period of two hours, during which the column outlet temperature
  8. customstayed at 62°-63° C. while the flask temperature
  9. customrose from 90° C. to 138° C
  10. filtrationthe sodium salt was filtered through a Buchner funnel
  11. washThe salt was first washed with xylene
  12. customto remove the residual amine
  13. customto air dry
  14. stirringrestirred in one liter of cold water
  15. filtrationThe product was filtered
  16. customair dried

출처 및 근거

ORD 기록
ord-63d3aff4ea484c7ba7c55e916019ca0b
출처 데이터셋
uspto-grants-1982_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04322551

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트