홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Water → 3-Methyl-N1-(2,2,2-trifluoroethyl)-1,3-butanediamine

HRID 2061094
노트
인쇄 미리보기

반응식

HRID 2061094 반응식
[N:1]([C:4]([CH3:15])([CH3:14])[CH2:5][C:6]([NH:8][CH2:9][C:10]([F:13])([F:12])[F:11])=O)=[N+]=[N-].[H-].[H-].[H-].[H-].[Li+].[Al+3].O.[OH-].[Na+]>C1COCC1>[CH3:15][C:4]([NH2:1])([CH3:14])[CH2:5][CH2:6][NH:8][CH2:9][C:10]([F:11])([F:12])[F:13]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 962Water2회HCID 14798Sodium HydroxideHCID 21226445Aluminium lithium hydrideHCID 601345313-azido-3-methyl-N-(2,2,2-trifluoroethyl)butanamide

생성물 1

HCID 601345643-Methyl-N1-(2,2,2-trifluoroethyl)-1,3-butanediamine

시약·촉매·용매 1

HCID 8028Tetrahydrofuran
용매
2회

반응 조건

온도
70 °C

실험 절차

3-Azido-3-methyl-N-(2,2,2-trifluoroethyl)butanamide (10.9 g, 48.4 mmol) was dissolved into anhydrous THF (50 mL) and added dropwise to a suspension of LAH (3.67 g, 2.0 equiv, 96.8 mmol) in anhydrous THF (200 mL) to maintain the reaction at reflux (30 min). After complete addition, the flask was fitted with a condenser and the reaction heated in a 70° C. oil bath for 8 h. The reaction mixture was cooled in an ice bath and water (4 mL) was added dropwise over 20 min. Then 15% NaOH solution (4 mL) was added dropwise over 10 min. The suspension was stirred for a further 10 min and water (4 mL) was added in one portion and the mixture stirred for 30 min to a give fine white suspension. The suspension was filtered through a pad of Celite® and washed with isopropyl alcohol (2×200 mL). Aqueous acid (6 N HCl, 10.0 mL) was added to the combined filtrate and concentrated on a rotovap to an oily residue. The residue was partitioned between DCM (100 mL) and water (100 mL). The aqueous layer was adjusted to pH ˜14 and the organic layer was separated and the aqueous phase was extracted with DCM (2×50 mL). The combined organic layers were combined and dried over anhydrous MgSO4, filtered and concentrated with a bath temperature between 10-13° C. to an orange liquid (8.84 g, quant). 1H NMR (CDCl3, 400 MHz): δ 1.15 (s, 6H), 1.55-1.62 (t, J=7.2, 2H), 2.81-2.86 (t, J=7.2, 2H) 3.15-3.22 (q, J=9.6, 2H). LRMS (ESI+) for C7H15F3N2 (184.1); Found: 185 (MH+).

후처리

  1. temperatureto maintain
  2. customthe reaction
  3. temperatureat reflux (30 min)
  4. additionAfter complete addition
  5. customthe flask was fitted with a condenser
  6. temperatureThe reaction mixture was cooled in an ice bath
  7. stirringthe mixture stirred for 30 min to a give fine white suspension
  8. filtrationThe suspension was filtered through a pad of Celite®
  9. washwashed with isopropyl alcohol (2×200 mL)
  10. additionAqueous acid (6 N HCl, 10.0 mL) was added to the combined filtrate
  11. concentrationconcentrated on a rotovap to an oily residue
  12. customThe residue was partitioned between DCM (100 mL) and water (100 mL)
  13. customthe organic layer was separated
  14. extractionthe aqueous phase was extracted with DCM (2×50 mL)
  15. dry with materialdried over anhydrous MgSO4
  16. filtrationfiltered
  17. concentrationconcentrated with a bath temperature between 10-13° C. to an orange liquid (8.84 g, quant)

출처 및 근거

ORD 기록
ord-c6225b1935ac44e9a9059c7d4a823a90
출처 데이터셋
uspto-grants-2012_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08278482B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트