홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Bicarbonate → [2-Methyl-1-phenyl-2-(1-pyrrolidinyl)propyl]amine

HRID 20787
인쇄

반응식

HRID 20787 반응식
[CH3:1][C:2]([N:6]1[CH2:10][CH2:9][CH2:8][CH2:7]1)([CH3:5])[C:3]#[N:4].[C:11]1([Li])[CH:16]=[CH:15][CH:14]=[CH:13][CH:12]=1.C(=O)([O-])O.[Na+].[BH4-].[Na+]>C1COCC1.C(OCCCC)CCC>[CH3:1][C:2]([N:6]1[CH2:10][CH2:9][CH2:8][CH2:7]1)([CH3:5])[CH:3]([NH2:4])[C:11]1[CH:16]=[CH:15][CH:14]=[CH:13][CH:12]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 516892Sodium BicarbonateHCID 4311764Sodium borohydrideHCID 125706472-Methyl-2-(pyrrolidin-1-yl)propanenitrileHCID 178506676HCID 178506676, 화합물

생성물 1

HCID 25158607[2-Methyl-1-phenyl-2-(1-pyrrolidinyl)propyl]amine수율 88%

시약·촉매·용매 2

HCID 8028
Tetrahydrofuran
용매
HCID 8909Butyl ether용매

반응 조건

온도
-70 °C

실험 절차

To a solution of 2-methyl-2-(1-pyrrolidinyl)propanenitrile D4 (10.7 g; 77.54 mmol) in THF (400 ml) at −70° C. under argon was added over 10 minutes a solution of phenyllithium in dibutylether (86.3 ml of a 1.8M solution; 155 mmol). The reaction mixture was stirred at −70° C. for 2 hours then allowed to warm to room temperature and stirred overnight. The reaction mixture was cooled in ice as saturated aqueous sodium hydrogen carbonate (400 ml) was added. After stirring for a further 30 minutes the layers were separated, and the aqueous layer extracted with ether (200 ml). Combined organics were dried (MgSO4) and evaporated. The residual amber oil was dissolved in methanol (400 ml), cooled in ice and sodium borohydride (5.2 g; 137 mmol) added in four portions over 5 minutes. The reaction mixture was stirred with ice cooling for 30 minutes, the ice removed and stirred at room temperature for 1.5 hours. The mixture was cooled in ice as water (50 ml) was added prior to concentration in vacuo to approx 70 ml. The mixture was partitioned between 2N HCl (100 ml) and ethyl acetate (400 ml) and the organics extracted with 2N HCl (2×100 ml). Combined acidic aqueous layers were washed with ethyl acetate (200 ml), basified with 50% NaOH and extracted with DCM (3×150 ml). Combined DCM organic extracts were dried (Na2SO4) and evaporated in vacuo to afford the title compound as a colourless solid (15 g: 88%) 1H NMR (CDCl3), δ: 0.75 (3H, s), 0.99 (3H, s), 1.70-1.76 (4H, m), 1.80 (2H, bs), 2.65-2.70 (4H, m), 4.08 (1H, s), 7.20-7.42 (5H, m).

후처리

  1. temperatureto warm to room temperature
  2. stirringstirred overnight
  3. additionwas added
  4. stirringAfter stirring for a further 30 minutes the layers
  5. customwere separated
  6. extractionthe aqueous layer extracted with ether (200 ml)
  7. dry with materialCombined organics were dried (MgSO4)
  8. customevaporated
  9. dissolutionThe residual amber oil was dissolved in methanol (400 ml)
  10. temperaturecooled in ice
  11. stirringThe reaction mixture was stirred with ice cooling for 30 minutes
  12. customthe ice removed
  13. stirringstirred at room temperature for 1.5 hours
  14. temperatureThe mixture was cooled in ice as water (50 ml)
  15. additionwas added
  16. concentrationto concentration in vacuo to approx 70 ml
  17. customThe mixture was partitioned between 2N HCl (100 ml) and ethyl acetate (400 ml)
  18. extractionthe organics extracted with 2N HCl (2×100 ml)
  19. washCombined acidic aqueous layers were washed with ethyl acetate (200 ml)
  20. extractionextracted with DCM (3×150 ml)
  21. dry with materialCombined DCM organic extracts were dried (Na2SO4)
  22. customevaporated in vacuo

출처 및 근거

ORD 기록
ord-7406a6edf6d94aef9c5f3677f56333ea
출처 데이터셋
uspto-grants-2010_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07745642B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트